General

Prof. Dr. Xiang-Xi Ye
Shanghai Institute of Applied Physics, Chinese Academy of Sciences
2019 Jia Luo Road, Jiading district, Shanghai 201800, P. R. China
Tel: +86-21-39191002  Fax:+86-21-39194539
E-mail: yexiangxi@sinap.ac.cn


Research Focus Areas

Superalloys for molten salt reactor

Education

Ph.D., Atomic and molecular physics, Fudan University, Shanghai, 2012
B.S., Electronic science and technology, Fudan University, Shanghai, 2007


Experience

   
Work Experience

Dr. Ye began his professional career at SINAP as a Researcher Associate in 2013. He became a full Professor in December 2020. 


Publications

   
Peer Reviewed Journal Papers

2024

  • S. Liu, X.-X. Ye*, T. Wu, W. Yin, H. Chen, J. Xu, X. Zhou, Effects of Nb addition on the carbides, grain boundary characteristics and tensile properties of a Ni–26W–6Cr-based superalloy, Mater. Sci. Eng. A 894 (2024) 146176. 
  • J. Dai, S. Fan, C. Liu, J. Li, J. Xu, S. Yan, S. Wang,  X.-X. Ye*, The influence of Zr concentration on the microstructure and properties of Cu-0.6Cr-xZr alloy: High-throughput preparation and characterization study, J Mater. Res. Technol. 28 (2024) 3396–3401. 

  • J. Dai, S. Fan, J. Xu, C. Liu, X.-X. Ye*,  Investigation of the sintering process and high-throughput sample preparation of Cu-Cr-Zr alloy, Mater. Lett. 357 (2024) 135805.

  • Z. Tian, S. Chen, Y. Wang, X.-X. Ye, W. Tao, S. Yang, Study on the mechanism of Ni-26W-6Cr alloy solidification cracking: Effect of laser welding heat input, Mater. Lett. 357 (2024) 135779.  

  • C. Liu, X.-X. Ye*, Z. Zhu, S. Huang, S. Zhao, G. Lei, L. Ge, X. Zhang, B. Leng, H. Huang, He bubbles inhibition and abnormal hardening in GH3535 alloy by niobium element addition, Journal of Nuclear Materials. 589 (2024) 154841

  • H. Xu, Y. Song, B. Leng, W. Zhang, C. Liu, X.-X. Ye, J. Yu, R. Liu, H. Huang, Corrosion behavior of UNS N10003 alloy in molten LiF-BeF2-ZrF4 with phosphide impurity, Corrosion Science. 226 (2024) 111635. 


2023

  • Z. Tian, S. Chen, Y. Wang, W. Tao, X.-X. Ye, N. Li, W. Ren, S. Yang, Laser welding of GH3539 alloy for molten salt reactor: Processing optimization, microstructure and mechanical properties, Mater. Charact. 205 (2023) 113266. 

  • P. Shi, B. Leng, X.-X. Ye, S. Wang, L. Chang, X. Li, X. Li, H. Huang, Tribological behavior of 316H stainless steel in NaNO3-KNO3 molten salt at elevated temperature, Solar Energy Materials and Solar Cells. 257 (2023) 112377. 

  • Z. Tian, S. Chen, Y. Wang, W. Tao, X.-X. Ye, W. Ren, S. Yang, Dynamic laser welding hot cracking behavior and mechanism of new structural material Ni–28W–6Cr alloy for molten salt reactor, J Mater. Res. Technol. 25 (2023) 3022–3036. 

  • S. Liu, X.-X. Ye*, W. Yin, J. Li, H. Chen, Y. Jia, M. Cao, X. Zhou, Effects of W content on the irradiation resistance of Ni-xW-6Cr alloys under Xe26+ ion irradiation, Nucl Instrum Meth B. 539 (2023) 1–8. 

  • J. Dai, C. Liu, S. Fan, X.-X. Ye*, High-throughput study of the effect of indium on the microstructure and properties of copper alloy, J Mater Res Technol. 27 (2023) 2336–2345. 

  • S. Liu, X.-X. Ye*, C. Ming, S. Yan, Y. Jia, H. Chen, P. Liu, J. Li, X. Zhou, Effects of Ce addition on the oxidation behavior of Ni-28W-6Cr superalloy, J Alloy Compd. 933 (2023) 167725.


2022

  • C. Liu, X.-X. Ye*, X. Li, F. Han, X. Li, R. Liu, B. Leng, H. Huang, The effect of niobium element on the tensile behavior in GH3535 alloy at room temperature and 750 °C, Materials Science and Engineering: A 861 (2022) 144401.

  • K. Yu, X. Tang, L. Jiang, X.-X. Ye, C. Xu, Z. Li, Microstructure and hardness evolution of ERNiCrMo-3 deposited metal during aging at 750 °C, Journal of Materials Science 57 (2022) 9415–9426.

  • J.M. Wang, Y.Y. Jia, F.F. Han, Y.L. Lu, Z.Y. Zhu ,X.-X. Ye, W.X. Wang, S.L. Wang, X.T. Zhou, Effect of Al addition on intergranular embrittlement behavior of GH3535 alloy induced by fission product Te, Corrosion Science 207 (2022) 110576.

  • F.F. Han, Y.Y. Jia, Z.Y. Zhu, J.M. Wang, L.N. Gao, H.X. Xu, B. Leng, X.L. Li, C.L. Ren, X.-X. Ye, H.F. Huang, Influence of lanthanum element on tellurium induced embrittlement of Ni-16Mo-7Cr alloy, Corrosion Science 203 (2022) 110360.

  • C. Liu, X. Tang, L. Cheng, B. Leng, X. Li, X.-X. Ye, H. Huang, The characterization of corrosion layers of GH3535 and Inconel 625 alloys in molten KNO3-NaNO3 salts at 500 °C, Corrosion Science. 204 (2022) 110406. 

  • S. Liu, X.-X. Ye*, S. Yan, C. Ming, Y. Lu, X. Zhou, Effect of Hf as oxygen vacancy formation inhibitor on the oxidation behavior of Ni-28W alloy, Corrosion Science 202 (2022) 110309.

  • J. Zheng, S. Chen, L. Jiang,  X.-X. Ye, C. Xu, Z. Li, Effect of carbon content on the microstructure and mechanical properties of NiCrFe-7A alloys synthesized by wire arc additive manufacturing, Materials Science and Engineering: A 842 (2022) 142925.

  • S. Chen, P. Pan, J. Xue, X.-X. Ye, Revealing the role of W in the microstructure, hardness and weldabilites of new developed Ni-xW-6Cr alloys, Materials Letters 314 (2022) 131914. 

  • L. Gao, F. Han, S. Chen, X.-X. Ye*, B. Leng, High-temperature corrosion behavior of Inconel 617 with Ni-claddings in molten FLiNaK salt, Materials and Corrosion 73 (2022) 486-496.Cover Article
  • S. Liu, X.-X. Ye* L. Jiang, R. Liu, Z. Gao, X. Gong, Z. Li, X. Zhou, Effect of Zr addition on the microstructure and intermediate-temperature mechanical performance of a Ni–26W–6Cr based superalloy, Materials Science and Engineering: A 833 (2022) 142517.
  • L. Jiang, K. Wang, B. Leng, X.-X. Ye,, S.-J. Chen, R.-D. Liu, J.-P. Liang, C.-W. Li, Z.-J. Li, Tellurium segregation-induced intergranular corrosion of GH3535 alloys in molten salt, Corrosion Science 194 (2022) 109944.
  • L. Jiang, X.-X. Ye,, S. Yan, L. Li, J.-P. Liang, C.-W. Li, D.-J. Wang, Z.-J. Li, Characterization of gradient vanadium carbide coating using synchrotron X-ray microdiffraction, Materials Letters 308 (2022) 131030.
  • X. Li, B. Leng, X.-X. Ye, C. Liu, L. Chang, X. Zhou, Effect of yttrium content on the corrosion behavior of nickel-based UNS N10003 alloy in high-temperature molten LiF-NaF-KF salt, Corrosion Science 194 (2022) 109940.


2021

  • X. Li, L. Chang, C. Liu, B. Leng,X.-X. Ye, F. Han, X. Yang, Effect of thermal aging on corrosion behavior of type 316H stainless steel in molten chloride salt, Corrosion Science, 191 (2021) 109784.
  • S. Ren, X.-X. Ye*, L. Jiang, Z. Li, Z. Chen, Z. Dai,Study on the Properties of Tribaloy® T400 Coating on 316H Stainless Steel Surface by Plasma Powder Welding,Nonferrous Metal Materials and Engineering, 42 (2021) 31-38
  • H. Xu, Q. Liu, B. Leng, W. Zhang,X.-X. Ye, F. Han, X. Li, R. Liu, J. Wang, Non-uniform corrosion of UNS N10003 alloy induced by trace SO42- in molten FLiNaK salt, Corrosion Science 192 (2021) 109802.
  • J. Xiao, M. Li, J.-p. Liang, L. Jiang, D.-j. Wang,X.-X. Ye, Z.-z. Chen, N.-x. Wang, Z.-j. Li, Fine structure characterization of an explosively-welded GH3535/316H bimetallic plate interface, International Journal of Minerals, Metallurgy and Materials 28(11) (2021) 1811-1820.
  • K. Wang, L. Jiang, X.-X. Ye, J.-P. Liang, C.-W. Li, F. Liu, Z.-J. Li, Absorption effect of pure nickel on the corrosion behaviors of the GH3535 alloy in tellurium vapor, Nucl. Sci. Tech. 32(12) (2021). DOI:10.1007/s41365-021-00976-x
  • S. Liu,X.-X. Ye*, S. Yan, X. Wang, B. Leng, X. Zhou, Unexpected accelerated corrosion of Cr in Ni-xW-6Cr alloy with W content increasing, Corrosion Science 191 (2021) 109761.
  • Y. Wu, C. Liu, B. Leng, L. Jiang,X.-X. Ye, X. Li, Z. Li, X. Zhou, Effect of high temperature molten salt corrosion on the microstructure of a Co-Mo-Cr-Si wear resistant alloy, Materials Characterization 179 (2021) 111377.
  • F. Xia, D. Tie, J. Wang, H. Song, W. Wen,X.-X. Ye, J. Wu, Y. Hou, X. Lu, Y. Zhao, Ultrahigh rate and durable sodium-ion storage at a wide potential window via lanthanide doping and perovskite surface decoration on layered manganese oxides, Energy Storage Materials 42 (2021) 209-218.
  • S. Ren, Y. Chen,X.-X. Ye*, L. Jiang, S. Yan, J. Liang, X. Yang, B. Leng, Z. Li, Z. Chen, Z. Dai, Corrosion behavior of carburized 316 stainless steel in molten chloride salts, Solar Energy 223 (2021) 1-10.
  • S. Liu,X.-X. Ye*, C. Ming, S. Yan, L. Jiang, Z. Li, X. Zhou, An approach to improve the oxidation resistance of a Ni-28W-6Cr alloy by hindering the oxygen vacancy-mediated oxidation, Corrosion Science 187 (2021) 109480.
  • T. Lei, L. Jiang,X.-X. Ye, C.-W. Li, J.-P. Liang, F. Liu, Z.-J. Li, Effect of W/Mo ratio on the as-cast microstructure of Nb-modified Hastelloy N alloys, Materials Characterization 175 (2021) 111075.
  • J. Fan, P. Li, J. Liang,X.-X. Ye, L. Jiang, K. Chen, Z. Li, X. Zhou, Intermediate-Temperature Heat Treatment of UNS N10003 Alloy during Cold Working, Journal of Materials Engineering and Performance 30 (2021) 2355–2364.

  • H. Ai, S. Liu,X.-X. Ye*, L. Jiang, B. Zhou, X. Yang, B. Leng, Z. Li, Metallic impurities induced corrosion of a Ni-26W-6Cr alloy in molten fluoride salts at 850 oC, Corrosion Science 178 (2021) 109079.

  •  L. Gao, F. Han, S. Chen,X.-X. Ye*, B. Leng, X. Zhou, Effect of Isothermal Aging on Microstructure Evolution of Ni Claddings on Inconel 617, Journal of Materials Engineering and Performance  30(4) (2021) 2389–2398.

2020

  •  Y. Wu, B. Leng, X. Li, L. Jiang,X.-X. Ye, Y. Chen, X. Yang, Z. Li, X. Zhou, Corrosion behavior of a wear resistant Co-Mo-Cr-Si alloy in molten fluoride salts, Journal of Nuclear Materials 542 (2020) 152529.

  •  B.-H. Wu, L. Jiang,X.-X. Ye, C.-W. Li, J.-P. Liang, F. Liu, Z.-J. Li, On the origin of tellurium corrosion resistance of hot-rolled GH3535 alloy, Corrosion Science 170 (2020) 108644.

  • W. Wang, L. Jiang,X.-X. Ye, R.-D. Liu, C.-W. Li, J.-P. Liang, D.-J. Wang, Z.-J. Li, Effect of Nb addition on the microstructure of Ni–12Mo–7Cr based superalloy, Journal of Alloys and Compounds 828 (2020) 154137.

  •  L. Jiang,X.-X. Ye, D.-J. Wang, Z.-J. Li, Synchrotron radiation-based materials characterization techniques shed light on molten salt reactor alloys, Nucl. Sci. Tech. 31(1) (2020) 6.

  •  L. Jiang, W. Wang,X.-X. Ye, C.-W. Li, J.-P. Liang, D.-J. Wang, Z.-J. Li, Unexpected effect of hydroxyl radical on tellurium corrosion of the Ni–Mo–Cr–Nb based alloy, Corrosion Science 173 (2020) 108748.

  • S. Chen, L.b. Zhao, J. Wang, C. Li, Z. Li,X.-X. Ye, D.K.L. Tsang, K. Yu, Microstructure evolution and mechanical properties of simulated HAZ in a Ni-17Mo-7Cr superalloy: effects of the welding thermal cycles, Journal of Materials Science 55(27) (2020) 13372-13388.


2019

  • W. Wang, L. Jiang, C. Li, B. Leng,X.-X. Ye, R. Liu, S. Chen, K. Yu, Z. Li, X. Zhou, Effects of post-weld heat treatment on microstructure and mechanical properties of Hastelloy N superalloy welds, Materials Today Communications 19 (2019) 230-237.

  • M. Luo, Z. Liang, Y. Jia, X.-X. Ye, S. Yan, X. Xia, L. Wang, Z. Li, Z. Jiang, Grain-boundary corrosion of nickel-based alloy by synchrotron radiation technology, Surface Innovations 7(5) (2019) 278-283.

  • L. Jiang,X.-X. Ye, R.-D. Liu, J.-P. Liang, Z.-J. Li, Complex twin interfaces in M6C carbides, Materials Letters 250 (2019) 167-169.

  • L. Jiang, C.-T. Fu, B. Leng, Y.-y. Jia,X.-X. Ye, W.-Z. Zhang, Q. Bai, S. Xia, Z.-J. Li, F. Liu, X.-T. Zhou, Influence of grain size on tellurium corrosion behaviors of GH3535 alloy, Corrosion Science 148 (2019) 110-122.

  • J. Hou, F.-F. Han,X.-X. Ye, B. Leng, M. Liu, Y.-L. Lu, X.-T. Zhou, Effect of Surface Decarburization on Corrosion Behavior of GH3535 Alloy in Molten Fluoride Salts, Acta Metall. Sin. (Engl. Lett.) 32(3) (2019) 401–412.

  • R. Gao,X.-X. Ye*, S. Yan, Y. Lu, L. Jiang, Z. Li, X. Zhou, Effects of tungsten content on the high-temperature oxidation behavior of Ni-xW-6Cr alloys, Corrosion Science 149 (2019) 87-99.

  • S. Chen,X.-X. Ye*, D.K.L. Tsang, L. Jiang, K. Yu, C. Li, Z. Li, Welding solidification cracking susceptibility and behavior of a Ni-28W-6Cr alloy, J. Mater. Sci. Technol. 35(1) (2019) 29-35.

  • S. Chen,X.-X. Ye*, D.K.L. Tsang, L. Jiang, C. Li, K. Yu, Z. Li, Microstructure and its influence on the mechanical properties of Ni-28W-6Cr based alloy welded joints by GTAW, Acta Metallurgica Sinica (English Letters) 32 (2019) 1032-1040.

  • H. Ai,X.-X. Ye*, L. Jiang, B. Leng, M. Shen, Z. Li, Y. Jia, J.-Q. Wang, X. Zhou, Y. Xie, L. Xie, On the possibility of severe corrosion of a Ni-W-Cr alloy in fluoride molten salts at high temperature, Corrosion Science 149 (2019) 218-225.

2018

  • Y.-R. Yin, C.-L. Ren, H. Han, K.P. So,X.-X. Ye, X. Zhang, P. Huai, Z.-Y. Zhu, Theoretical study of fluorine-induced surface segregation of Cr in non-passivated Ni-based alloys, Journal of Applied Physics 124(13) (2018) 135302.

  • W. Xue, X. Yang,X.-X. Ye, L. Han, J. Wang, V. Ignatiev, X. Zhou, Effects of silicon carbide on the corrosion of metallic materials in molten LiF-NaF-KF salt, Corrosion Science 143 (2018) 157-165.

  • W. Wang, C. Li, L. Jiang,X.-X. Ye, K. Yu, S. Chen, Z. Li, X. Zhou, Evolution of carbide precipitates in Hastelloy N joints during welding and post weld heat treatment, Materials Characterization 135 (2018) 311-316.

  •  L. Jiang, W. Yinling, R. Hu, R. Liu,X.-X. Ye, Z. Li, X. Zhou, Formation of nano-sized M2C carbides in Si-free GH3535 alloy, Sci Rep 8(1) (2018) 8158.

  • Q. Dai,X.-X. Ye*, H. Ai, S. Chen, L. Jiang, J. Liang, K. Yu, B. Leng, Z. Li, X. Zhou, Corrosion of Incoloy 800H alloys with nickel cladding in FLiNaK salts at 850 °C, Corrosion Science 133 (2018) 349-357.

  • H. Chen, Y. Hai, R. Liu, L. Jiang,X.-X. Ye, J. Li, W. Xue, W. Wang, M. Tang, L. Yan, The irradiation hardening of Ni-Mo-Cr and Ni-W-Cr alloy under Xe 26+ ion irradiation, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 421 (2018) 50-58.

  •  H. Ai, J. Hou,X.-X. Ye*, C.L. Zeng, H. Sun, X. Li, G. Yu, X. Zhou, J.-Q. Wang, Influence of graphite-alloy interactions on corrosion of Ni-Mo-Cr alloy in molten fluorides, Journal of Nuclear Materials 503 (2018) 116-123.

2017

  • X. Zhang, C.-L. Ren, H. Han,X.-X. Ye, E. Kuo, C.-B. Wang, W. Zhang, L. Jiang, G. Lumpkin, P. Huai, Theoretical study of the substitutional solute effect on the interstitial carbon in nickel-based alloy, RSC Advances 7(33) (2017) 20567-20573.

  • C. Wang, H. Han, D. Wickramaratne, W. Zhang, H. Wang,X.-X. Ye, Y. Guo, K. Shao, P. Huai, Diffusion of tellurium at nickel grain boundaries: a first-principles study, RSC Advances 7(14) (2017) 8421-8428.

  • L. Shen, L. Jiang, R. Liu,X.-X. Ye, W. Zhang, C. Song, Z. Li, X. Zhou, Evolution of grain boundary carbides in thermal exposed Ti-modified alloy N, Materials Characterization 133(Supplement C) (2017) 54-59.

  • L. Jiang,X.-X. Ye, Z.-Q. Wang, C. Yu, J.-S. Dong, R. Xie, Z.-J. Li, L. Yan, T.-K. Sham, X.-T. Zhou, A.-M. Li, The critical role of Si doping in enhancing the stability of M 6 C carbides, Journal of Alloys and Compounds 728 (2017) 917-926.

  • Y. Jia, Z. Li,X.-X. Ye, R. Liu, B. Leng, J. Qiu, M. Liu, Z. Li, Effect of Cr contents on the diffusion behavior of Te in Ni-based alloy, Journal of Nuclear Materials 497 (2017) 101-106.

  • F. Han, L. Jiang,X.-X. Ye, Y. Lu, Z. Li, X. Zhou, Carbides Evolution in a Ni-16Mo-7Cr Base Superalloy during Long-Term Thermal Exposure, Materials 10(5) (2017) 521.

  • C.-T. Fu, Y. Wang, X.-W. Chu, L. Jiang, W.-Z. Zhang, Q. Bai, S. Xia, B. Leng, Z.-J. Li,X.-X. Ye, F. Liu, Grain boundary engineering for control of tellurium diffusion in GH3535 alloy, Journal of Nuclear Materials 497(Supplement C) (2017) 76-83.

  • S. Chen,X.-X. Ye, K. Yu, C. Li, Z. Li, Z. Li, X. Zhou, Microstructure and mechanical properties of UNS N10003 alloy welded joints, Materials Science and Engineering: A 682 (2017) 168-177.

2016

  • X. Zhou, H. Huang, R. Xie, C. Yang, Z. Li, L. Jiang,X.-X. Ye, H. Xu, The Key Role of Ball Milling Time in the Microstructure and Mechanical Property of Ni-TiCNP Composites, Journal of Materials Engineering and Performance 25(12) (2016) 5280-5288.

  • X.-X. Ye, H. Ai, Z. Guo, H. Huang, L. Jiang, J. Wang, Z. Li, X. Zhou, The high-temperature corrosion of Hastelloy N alloy (UNS N10003) in molten fluoride salts analysed by STXM, XAS, XRD, SEM, EPMA, TEM/EDS, Corrosion Science 106 (2016) 249-259.

  • C. Yang, H. Huang, G.J. Thorogood, L. Jiang, X.-X. Ye, Z. Li, X. Zhou, The Effect of Grain Size and Dislocation Density on the Tensile Properties of Ni-SiCNP Composites During Annealing, Journal of Materials Engineering and Performance 25(3) (2016) 726-733.

  • L. Lu, Y. Jia,X.-X. Ye, M. Luo, F. Song, Y. Huang, X. Zhou, Z. Li, Z. Jiang, Local structure study of tellurium corrosion of nickel alloy by X-ray absorption spectroscopy, Corrosion Science 108 (2016) 169-172.

  • S. Liu,X.-X. Ye*, L. Jiang, C. Cui, Z. Li, H. Huang, B. Leng, X. Zhou, Effect of tungsten content on the microstructure and tensile properties of Ni–xW–6Cr alloys, Materials Science and Engineering: A 655 (2016) 269-276.

  • L. Jiang, W.-Z. Zhang, Z.-F. Xu, H.-F. Huang,X.-X. Ye, B. Leng, L. Yan, Z.-J. Li, X.-T. Zhou, M 2 C and M 6 C carbide precipitation in Ni-Mo-Cr based superalloys containing silicon, Materials & Design 112 (2016) 300-308.

  • L. Jiang,X.-X. Ye, C. Cui, H. Huang, B. Leng, Z. Li, X. Zhou, Intermediate temperature embrittlement of one new Ni-26W-6Cr based superalloy for molten salt reactors, Materials Science and Engineering: A 668 (2016) 137-145.

2013-earlier

  • K. Peng, C. Ming,X.-X. Ye, W.X. Zhang, J. Zhuang, X.J. Ning, Doping influence on the ability to form single crystals, Chem Phys Lett 501(4-6) (2011) 330-334.

  • X.-X. Ye, X.F. Gong, Y.Q. Xie, W.F. Yu, J. Zhuang, W.X. Zhang, W.M. Wang, X.J. Ning, Predicting the melting temperatures of bulk materials, Epl 91(4) (2010) 46001.

  • K. Peng, C. Ming,X.-X. Ye, W.X. Zhang, J. Zhuang, X.J. Ning, Influence of doping on the crystallization ability of mono-component materials, Acta Phys. Sin. 59(10) (2010) 7245-7251.

  • Y.F. Jin,X.-X. Ye, J.T. Li, W.X. Zhang, J. Zhuang, X.J. Ning, A Simple Theoretical Method to Predict the Hardness of Pure Metal Crystals, Chinese Phys Lett 27(7) (2010) 076201.

  • Y.F. Jin, C. Ming,X.-X. Ye, W.M. Wang, X.J. Ning, A simple theoretical model for evaluating the ability to form a single crystal, Chinese Phys B 19(7) (2010) 076105.

  • C. Yin, X.J. Ning, J. Zhuang, Y.Q. Xie, X.F. Gong,X.-X. Ye, C. Ming, Y.F. Jin, Shape prediction of two-dimensional adatom islands on crystal surfaces during homoepitaxial growth, Applied Physics Letters 94(18) (2009) 183107.

  • X.-X. Ye, C. Ming, Y.C. Hu, X.J. Ning, Evaluating the ability to form single crystal, J Chem Phys 130(16) (2009) 164711.

  • X.-X. Ye, C. Ming, Y.C. Hu, X.J. Ning, Theoretical prediction of the ability for bulk materials to form single crystals, Acta Phys. Sin. 58(5) (2009) 3293-3301.

Research Interests

High temperature strength

Corrosion (molten salts & oxidation)

Synchrotron radiation techniques

Computational materials science


Students

现指导学生

李季峰  博士研究生  082701-核能科学与工程  

宋奥翔  硕士研究生  082701-核能科学与工程  

田锦涛  博士研究生  082701-核能科学与工程