Tingmei Wang  Professor Lanzhou Institute of Chemical Physics, CAS
Email: wangtin3088@sina.com
Telephone:
Address: No.18,Tianshui Middle Road,Lanzhou,P.R.China 
Postcode: 730000

Research Areas

Design and Prepartion of Porous Polymer
Research and design of polymer composite
Preparation and performance study on Inorganic/Organic Nanocomposites
Study on High Strength Fiber Reinforced polymer Composite

Education and Experience

1988.7-1992.7 Major in organic chemical in chemical engineering department of Northwestern University
1992.7-1994.6 Assistant engineer in LDPE workshop of Cnpc lanzhou chemical company
1994.7-1995.6 Engineer in Cnpc lanzhou chemical company
1995.7-1998.7 Master in Organic Chemistry in Lanzhou University
1998.7-2000.8 Process designer in Designing Instituteof Cnpc lanzhou chemical company
2000.7-2003.7 PH. D. Students in Lanzhou Institute of Chemical Physics
2003.10-present Associate professor and professor in Lanzhou Institute of Chemical Physics, CAS

Publications

1. Chao Wang, Tingmei Wang, Qihua Wang. Solvent annealing assisted self-assembly of hydrogen-bonded interpolymercomplexes of AB block copolymer/C homopolymer in thin film. Polymer 2010, 51: 4836-4842.
2. Chao Wang, Tingmei Wang, Qihua Wang. A simple method for preparation of porous polyimide with an ordered surface based on in situ self-assembly of polyamic acid and silica microspheres. Langmuir, 26(2010), 18357-18361.
3. Chao Wang, Tingmei Wang a, Xianqiang Pei, Qihua Wang. Shell–core–corona aggregates formed from poly(styrene)-poly(4-vinylpyridine) block copolymer induced by added homopolymer via interpolymer hydrogen-bonding. Polymer, 2008, 50: 5268–5275.
4. Chao Wang, Yaoming Zhang , Xianqiang Pei , Tingmei Wang, Qihua Wang. Ordered luminescent nanohybrid thin films of Eu(BA)3Phen nanoparticle in polystyrene matrix from diblock copolymer self-assembly. Applied Surface Science 256 (2010) 2818–2825.
5. Tingmei Wang, Shoubing Chen, Qihua Wang, Xianqiang Pei. Damping analysis of polyurethane/epoxy graft interpenetrating polymernetwork composites filled with short carbon fiber and micro hollow glass bead. Materials & Design, 2010, 31: 3810–3815.
6. Shoubing Chen, Qihua Wang, Xianqiang Pei, Tingmei Wang. Dynamic mechanical properties of castor-oil-based polyurethane/epoxy graft interpenetrating network composites. Journal of Applied Polymer Science, 118(2): 1144-1151.
7. Qihua Wang,Weixin Hou,Yaoming Zhang. Superhydrophobic and luminescent methylsilicone resin film. Applied Surface Science, 2010, 256: 664-667.
8.Chen, S.; Wang, Q.; Wang, T., Physical properties of a high molecular weight hydroxyl-terminated polydimethylsiloxane modified castor oil based polyurethane/epoxy interpenetrating polymer network composites. Applied Physics A: Materials Science & Processing 2011, 103 (4), 1047-1052.
9.Wang, Q.; Chen, S.; Wang, T.; Zhang, X., Damping, thermal, and mechanical properties of polyurethane based on poly(tetramethylene glycol)/epoxy interpenetrating polymer networks: effects of composition and isocyanate index. Applied Physics A: Materials Science & Processing 2011, 104 (1), 375-382.
10.Chen, S.; Wang, Q.; Wang, T.; Pei, X., Preparation, damping and thermal properties of potassium titanate whiskers filled castor oil-based polyurethane/epoxy interpenetrating polymer network composites. Materials & Design 2011, 32 (2), 803-807.
11.Chen, S.; Wang, Q.; Wang, T., Mechanical, damping, and thermal properties of calcium sulfate whisker-filled castor oil-based polyurethane/epoxy IPN composites. Journal of Reinforced Plastics and Composites 2011, 30 (6), 509-515.
12.Chen, S.; Wang, T.; Wang, Q.; Pei, X., Damping Properties of Polyurethane/Epoxy Graft Interpenetrating Polymer Network Composites Filled with Short Carbon Fiber and Nano-SiO2. Journal of Macromolecular Science, Part B: Physics 2011, 50 (5), 931 - 941.
13.Chen, S.; Wang, Q.; Wang, T., Friction and Wear Behaviors of Two Kinds of Hydroxyl-Terminated Polydimethylsiloxane-Modified PU/EP IPN Composites Under Dry Sliding Conditions. Tribology Letters 2011,doi: 10.1007/s11249-011-9816-4
14.Shoubing Chen, Qihua Wang, and Tingmei Wang, Dynamic mechanical properties of polysiloxane-modified, castor oil-based polyurethane/epoxy interpenetrating polymer network composites, High Performance Polymers, 2011, doi:10.1177/0954008311405869
15.Shoubing Chen, Qihua Wang, and Tingmei Wang, Hydroxy-terminated liquid nitrile rubber modified castor oil based polyurethane/epoxy IPN composites: damping, thermal and mechanical properties, Polymer testing, In Press, doi:10.1016/j.polymertesting.2011.06.011 

Paper from 2012
(1) Low dielectric, nanoporous fluorinated polyimide films prepared from PCL-PI-PCL 3 triblock copolymer using retro-Diels–Alder reaction,Journal of Colloid and Interface Science,2013,通讯作者
(2) Controllable low dielectric porous polyimide films templated by silica microspheres: Microstructure, formation mechanism, and properties,Journal of Colloid and Interface Science,2013,通讯作者
(3) Studies on wettability, mechanical and tribological properties of the polyurethane composites filled with talc,Applied Surface Science ,2012,通讯作者
(4) Preparation and tribological properties of graphene oxide/nitrile rubber nanocomposites,Journal of Materials Science,2012,通讯作者
(5) Phenylphosphine oxide-containing aromatic polyamide films with high atomic oxygen erosion resistance,Polymer Degradation and Stability,2012,通讯作者
(6) Damping, thermal, and mechanical properties of carbon nanotubes modified castor oil-based polyurethane/epoxy interpenetrating polymer network composites,Materials and Design,2012,通讯作者
(7) Damping, Thermal, and Mechanical Properties of Polycaprolactone-Based PU/EP Graft IPNs: Effects of Composition and Isocyanate Index,Journal of Macromolecular Science , Part B: Physics,2012,通讯作者
(8) Thermoresponsive PNIPAAm-modified cotton fabric surfaces that switch between superhydrophilicity and superhydrophobicity,Applied Surface Science,2012,第3作者
(9) In Situ Synthesis and Properties of PMR PI/SiO2 Nanocomposites,Journal of Applied Polymer Science,2012,第2作者
(10) Influence of the Hard Segment Content on the Mechanical and Tribological Properties of the Polyurethane Modified by Hydroxyl-Terminated Polydimethylsiloxane Under Different Lubricated Conditions,Polymer Composites,2012,第1作者

Students

已指导学生

苏丽敏  02  19217  

陈钰  01  19217  

李裕琪  01  19217  

王彦明  01  19217  

巨军平  01  20652  

白永康  01  19217  

郑菲  01  20652  

蔡鹏  01  20652  

现指导学生

张迪  01  20652  

宋富智  01  20652  

段春俭  02  20652  

邵明超  02  63222  

曲春辉  01  19217