Precise Film cooling Technology of Rotating Turbine Blade

Heat and Mass transfer on Aero-engine

Advanced Sealing Structure Design of Gas Turbine 

Rotordynamics

2005.09~2010.07, Beijing University of Aeronatics and Astronatics, Ph.D
2001.09~2005.07, Dalian University of Technology, Bachelor

   

2019.05~now, IET CAS, Proferssor

2014.01~2019.04, IET CAS, Associate Proferssor

2010.07~2013.12, IET CAS, Assistant Proferssor

（1） 军队科学技术奖, 一等奖, 部委级, 2019
（2） 科技成果转化奖, 特等奖, 部委级, 2014

   

（1） Optimization of Smooth Straight-Through Labyrinth Seal Based on XGboost and Improved GA, ASME Journal of Engineering for Gas Turbine and Power, 2025, Corresponding aothor
（2） Flow mechanisms and loss analysis of cavity leakage flow in a 1.5-stage axial compressor, Aerospace Science and Technology, 2025, Corresponding aothor
（3） Research Progress of Kidney Vortex and Its Application in Film Cooling, International Journal of Heat and Fluid Flow, 2025, Corresponding aothor
（4） 涡轮导叶吸力面气膜冷却掺混损失全三维分析, 工程热物理学报, 2025, Corresponding aothor
（5） Investigation on the discharge and windage heating characteristics of staggered labyrinth seals under adiabatic and heat transfer models, International Journal of Heat and Fluid Flow, 2024, Corresponding aothor
（6） Conjugated Heat Transfer Analysis on Action Mechanism of Centrifugal Force and Centrifugal Buoyancy in Staggered Labyrinth Seal, Case Studies in Thermal Engineering, 2024, Corresponding aothor
（7） 高线速度石墨密封多物理场耦合特性分析, 润滑与密封, 2024, Corresponding aothor
（8） Evolution Mechanism and Parametric Investigation of Relative Negative Pressure Zone in Spiral Groove Gas Face Seal for Aero-engine at High Rotation Speed, International Journal of Heat and Fluid Flow, 2024, Corresponding aothor
（9） 主流马赫数对气膜冷却效率与掺混损失的影响, 工程热物理学报, 2024, Corresponding aothor
（10） Evolution and Action Mechanism of Relative Negative Pressure Zone in Spiral Groove Gas Face Seal for Aero-engine, ASME Journal of Tribology, 2024, Corresponding aothor
（11） Effect of Injection Angle on Film Cooling Characteristics and Loss Mechanism of Contracted Double-Jet Hole in a Flat Plate, International Journal of Thermal Science, 2024, Corresponding aothor
（12） A total three-dimensional evaluation method to analyze the loss mechanism of film cooling on turbine guide vane, Applied Thermal Engineering, 2024, Corresponding aothor
（13） Film Cooling Performance on a Turbine Blade with Subregional Compound Angle, ASME Journal of Heat and Mass Transfer, 2024, Corresponding aothor
（14） Research Progress of Mixing Loss Model for Film Cooling on Turbine Blade, International Journal of Heat and Fluid Flow, 2024, Corresponding aothor
（15） 涡轮叶片吸力面双排分区域复合角气膜冷却特性分析, 工程热物理学报, 2024, Corresponding aothor
（16） 涡轮导叶压力面分区域复合角气膜冷却特性, 航空动力学报, 2024, Corresponding aothor
（17） Simulation on the effect of impinging distance for the aerodynamic and heat transfer characteristics of sweeping jet and film composite cooling, Applied Thermal Engineering, 2023
（18） 机器学习在涡轮机械中的应用进展, 工程热物理学报, 2023, Corresponding aothor
（19） Effects of Mainstream Velocity and Turbulence Intensity on the Sweeping Jet and Film Composite Cooling, MACHINES, 2023
（20） 收缩型双射流孔气膜冷却特性与损失机理, 航空动力学报, 2023, Corresponding aothor
（21） Effects of High Rotational Speed on Leakage and Windage Heating of Staggered Labyrinth Seals with Smooth and Honeycomb Lands, ASME Journal of Engineering for Gas Turbine and Power, 2023, Corresponding aothor
（22） Analysis of sweeping jet and film composite cooling using the decoupled model, OPEN PHYSICS, 2023
（23） Study on the bistable vibration behaviour of a rod-fastened rotor-bearing system, NONLINEAR DYNAMICS, 2022
（24） Leakage and wear characteristics of carbon seals for aero-engines, Chinese Journal of Aeronautics, 2022, Corresponding aothor
（25） Simulation of Flow Structure and Heat Transfer of Sweeping Jet and Film Composite Cooling on a Flat Plate, Applied Thermal Engineering, 2022
（26） Heat transfer and flow structure characteristics of film-cooled leading edge model with sweeping and normal jets, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2022
（27） Numerical Simulation of the Flow and Heat Transfer Characteristics of Sweeping and Direct Jets on a Flat Plate with Film Holes, Energies, 2022
（28） 扫掠冲击-气膜冷却结构的气动传热特性数值研究, 推进技术, 2022
（29） NUMERICAL SIMULATION ON INTERNAL FLOW AND HEAT TRANSFER OF SWEEPING JET AND FILM COMPOSITE COOLING ON A FLAT PLATE, Proceedings of Global Power and Propulsion Society, 2021
（30） 高低倾斜齿-蜂窝密封旋转换热特性研究, 2020年中国工程热物理学会传热传质学术会议, 2020, Corresponding aothor
（31） Experimental Investigation on the Leakage and Wear Characteristics of Carbon seal for Aero-engines, Proceedings of the Fourth Chinese International Turbomachinery Conference, 2020, Corresponding aothor
（32） Optimization of Flow Matching Schemes for a Heavy Gas Turbine Burning Syngas, Optimization of Flow Matching Schemes for a Heavy Gas Turbine Burning Syngas, JOURNAL OF THERMAL SCIENCE, 2020
（33） Leakage performance of labyrinth seal for oil sealing of aero-engine, Leakage performance of labyrinth seal for oil sealing of aero-engine, PROPULSION AND POWER RESEARCH, 2019, Corresponding aothor
（34） Leakage performance of floating ring seal in cold/hot state for aero-engine, CHINESE JOURNAL OF AERONAUTICS, 2019, Corresponding aothor
（35） Leakage performance of floating ring seal in cold/hot state for aero-engine, Leakage performance of floating ring seal in cold/hot state for aero-engine, 中国航空学报：英文版, 2019, Corresponding aothor
（36） Leakage and wear characteristics of finger seal in hot/cold state for aero-engine, TRIBOLOGY INTERNATIONAL, 2018, Corresponding aothor
（37） Two-phase Flow Performance of Labyrinth Seal in Cold/Hot State for Aero-engine, Proceedings of the 16th International Heat Transfer Conference, 2018, Corresponding aothor
（38） 篦齿封严封油特性的数值与实验研究, Numerical and Experimental Investigations on the Oil Sealing Characteristics of the Labyrinth Seal, 燃气轮机技术, 2017, Corresponding aothor
（39） Experimental study of the energy and exergy performance for a pressurized volumetric solar receiver, APPLIEDTHERMALENGINEERING, 2016
（40） Film cooling performance in a low speed 1.5-stage turbine: effects of mainstream Reynolds number and turbulence, HEAT AND MASS TRANSFER, 2015, Corresponding aothor
（41） Numerical Investigation of Heat Transfer Coefficient in a Low Speed 1.5-Stage Turbine, JOURNAL OF THERMAL SCIENCE, 2014, Corresponding aothor
（42） Experimental investigation of rotating film cooling performance in a low speed 1.5-stage turbine, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, Corresponding aothor
（43） Experimental Investigation on Film Cooling Performance of Pressure Side in Annular Cascades, JOURNAL OF THERMAL SCIENCE, 2011, Corresponding aothor
（44） FILM COOLING PERFORMANCE IN A LOW-SPEED 1.5-STAGE TURBINE: EFFECTS OF BLOWING RATIO AND ROTATION, JOURNAL OF ENHANCED HEAT TRANSFER, 2011, Corresponding aothor
（45） 涡轮叶片压力面旋转气膜冷却数值模拟, Numerical Simulation of Film Cooling on Pressure Side of Rotating Turbine Blade, 工程热物理学报, 2011, Corresponding aothor
（46） Experimental Investigation of Film Cooling in a Rotor Blade of a 1.5-stage Turbine, The 10th International Gas Turbine Congress, 2011, Corresponding aothor
（47） 吹风比对旋转涡轮叶片气膜冷却的影响, Influence of blowing ratio on film cooling of rotating turbine blade, 航空动力学报, 2011
（48） Film Cooling Characteristics on Pressure Side in Annular Turbine Cascade, The 3rd International Symposium on Jet Propulsion and Power Engineering, 2010, Corresponding aothor
（49） 涡轮叶片压力面旋转气膜冷却数值模拟, 中国工程热物理学会(传热传质学), 2010, Corresponding aothor
（50） 复合角对涡轮叶片旋转气膜冷却效果的影响, Numerical investigation on film cooling effectiveness of rotating blade with multihole, 航空动力学报, 2010, Corresponding aothor
（51） 旋转状态涡轮叶片吸力面单孔气膜冷却实验, Experimental investigation of rotating single-hole film cooling performance on suction side of a turbine blade, 航空动力学报, 2010, Corresponding aothor
（52） 旋转状态下涡轮叶片压力面气膜冷却特性, Film cooling characteristics on pressure side of rotating turbine blade, 北京航空航天大学学报, 2010, Corresponding aothor
（53） Experimental Investigation of Rotating Film Cooling in a 1.5-stage Turbine Using Thermochromic Liquid Crystal, ASME-ATI-UIT 2010 Conference on Thermal and Environmental Issues in Energy System, 2010, Corresponding aothor
（54） 轴流通风机非稳定工况特性的试验研究, Test and Research on Characteristics of Axial Flow Fan under Unsteady Operation Condition, 风机技术, 2006
（55） 汽轮机调节系统静特性实验测试系统的研制, 实验技术与管理, 2005

（ 1 ） 篦齿和浮环组合密封结构, 发明, 2018, 第 1 作者, 专利号: ZL201710454506.3
（ 2 ） 带积流槽的浮环密封组件, 发明, 2019, 第 1 作者, 专利号: ZL201710454507.8
（ 3 ） 带斜槽的浮环密封组件, 发明, 2018, 第 1 作者, 专利号: ZL201710454455.4
（ 4 ） 树杈型气膜孔结构, 发明, 2019, 第 1 作者, 专利号: ZL201710454453.5
（ 5 ） 一种涡轮动叶压力面及顶部复合角气膜孔布局结构, 发明, 2019, 第 1 作者, 专利号: ZL201710583845.1
（ 6 ） 一种涡轮动叶吸力面的复合角气膜孔布局结构, 发明, 2019, 第 1 作者, 专利号: ZL201710583848.5
（ 7 ） 一种确定油气资源量的方法及装置, 发明, 2018, 第 3 作者, 专利号: ZL201710192017.5
（ 8 ） 一种旋转光纤测温系统, 发明, 2020, 第 1 作者, 专利号: ZL202010842904.4
（ 9 ） 一种适用于发动机轴承腔的密封结构, 发明, 2020, 第 1 作者, 专利号: ZL202010842891.0
（ 10 ） 一种带有斜纹动压槽的石墨密封结构, 发明, 2020, 第 1 作者, 专利号: ZL202010843832.5
（ 11 ） 一种带有反鱼骨型动压槽的石墨密封结构, 发明, 2020, 第 1 作者, 专利号: ZL202010842885.5
（ 12 ） 一种轴承腔非接触化石墨密封结构, 发明, 2020, 第 1 作者, 专利号: ZL202010842892.5

已指导学生

崔垒  硕士研究生  080701-工程热物理  

张深  硕士研究生  080701-工程热物理  

李辉  博士研究生  080701-工程热物理  

李昂  硕士研究生  082502-航空宇航推进理论与工程  

刘浩  博士研究生  082502-航空宇航推进理论与工程  

现指导学生

刘佳林  博士研究生  080701-工程热物理  

王若凡  博士研究生  082502-航空宇航推进理论与工程  

康晨阳  硕士研究生  082502-航空宇航推进理论与工程  

王德森  博士研究生  082502-航空宇航推进理论与工程  

刘开阳  硕士研究生  085800-能源动力  

吴熙官  博士研究生  082502-航空宇航推进理论与工程