电子邮件：jyang@licp.cas.cn
通信地址：兰州市天水中路18号
邮政编码：730000
率先利用燃烧合成制备了纳米晶Fe3Al材料，推动和发展了该项技术，成功制备多种高强高韧纳米晶材料，并且较系统地研究了其摩擦学性能；系统研究了高强度Fe-Al基金属间化合物及其复合材料的制备和摩擦学性能；制备了同时具有高强度和优异宽温域润滑性能的镍基高温自润滑复合材料；发现了MAX相Ti3AlC2陶瓷在一定真空范围具有优异的自润滑性能，提出了自润滑机制；所研制材料成功获得型号装备应用。研究结果在Adv Mater、Acta Mater、Scripta Mater、Intermetallics和Wear等国际知名期刊合作发表SCI收录论文80余篇，第一和通讯作者40余篇，合作申报中国发明专利23件，其中授权8件，撰写英文专著1章，作了第六届青年摩擦学大会特邀报告（2013，青岛）和国际学术会议分会邀请报告1次（BIT’s 1st Annual world Congress of Nano-S&T 2011）。
研究领域
1. 块体纳米结构材料
2. 先进高温润滑抗磨材料
3. 金属间化合物基材料的制备和摩擦学性能
4. 先进陶瓷材料
5. 燃烧合成
6. 粉末冶金
招生信息
招生专业
080502-材料学
招生方向
功能纳米材料
材料环境行为与失效机理
教育背景
1995-09--1999-07 内蒙古大学化学系 学士学位
学历
学位
工作经历
工作简历
2006-01--2011-10 中科院兰州化学物理研究所 副研究员
2005-06--2005-12 中科院兰州化学物理研究所 助理研究员
专利与奖励
奖励信息
薛群基，刘近朱，喇培清，刘维民，杨军，毕秦岭，先进高温润滑抗磨材料的制备与应用，2009年度甘肃省技术发明一等奖。
2010年获第六届“兰化所青年创新奖”优秀奖
专利成果
1. 喇培清, 杨军, 刘维民, 薛群基, 毕秦岭, 含碳相增强的FeAl基金属间化合物复合材料的制备方法, 中国发明专利, 专利号: ZL02147653.5, 2005.
2. 喇培清, 薛群基, 刘维民, 杨军, 大块纳米晶镍铝金属间化合物的制备方法, 中国发明专利, 专利号: ZL02147650.0, 2005.
3. 薛群基, 喇培清, 刘维民, 杨军, 大块纳米晶碳化钨材料的制备方法, 中国发明专利, 专利号: ZL02147651, 2004.
4. 杨军, 刘维民, 马吉强, 毕秦岭, 高强度高韧性大尺寸纳米结构Fe-C合金的制备方法, 中国发明专利, 专利号: ZL200710307293.8.
5. 刘维民, 符立才, 杨军, 毕秦岭, 马吉强, 薛群基, 块体铁硼软磁材料的制备方法, 中国发明专利, 专利号: ZL200610105326.6.
6. 毕秦岭, 刘维民, 马吉强, 杨军, 薛群基, 镍铝金属间化合物基自润滑复合材料的制备方法, 中国发明专利, 专利号: ZL200710307296.1.
7. 喇培清, 杨军, 刘维民, 薛群基, 毕秦岭, 铁铝金属间化合物的制备方法, 中国发明专利, 申请号: 02141725.
8. 喇培清, 杨军, 刘维民, 薛群基, 块体纳米晶Fe3Al金属间化合物的制备方法, 中国发明专利, 申请号: 200310113958.3.
9. 杨军, 喇培清, 刘维民, 马吉强, 毕秦岭, 薛群基, 块体纳米金属Fe的制备方法. 中国发明专利, 申请号: 200410079970.1.
10. 马吉强, 刘维民, 喇培清, 杨军, 毕秦岭, 薛群基，一种镍铝铬合金及其制备方法, 中国发明专利, 申请号: 200510129878.
11. 毕秦岭, 刘维民, 杨军, 薛群基, 一种块体镍硅基非晶-纳米晶复合材料及其制备方法, 中国发明专利, 申请号: 200610104910.x.
12. 刘维民, 李来军, 毕秦岭, 杨军, 薛群基, 氧化铝/碳化钛微晶复相陶瓷及其制备方法, 中国发明专利, 申请号: 200610105393.8.
13. 刘维民, 符立才, 杨军, 毕秦岭, 马吉强, 薛群基, 一种大块纳米Fe-Si软磁材料的制备方法, 中国发明专利, 申请号: 200710188573.1.
14. 刘维民, 李来军, 毕秦岭, 杨军, 马吉强, 一种块体微晶纳米晶Cu的制备方法, 中国发明专利, 申请号: 200710308589.1.
15. 刘维民, 李来军, 毕秦岭, 杨军, 马吉强, 一种块体CuAlFe纳米复合材料的制备方法, 中国发明专利, 申请号: 200710308590.4.
16. 刘维民, 李来军, 杨军, 毕秦岭, 马吉强, 一种纳米铝铜铁准晶粉末的制备方法, 中国发明专利, 申请号: 200810184481.0.
17. 刘维民, 李来军, 毕秦岭, 杨军, 马吉强, 种铜铬中间合金的制备方法, 中国发明专利, 申请号: 200810184482.5.
18. 毕秦岭, 刘维民, 杨军, 陈建敏, 薛群基, 镍铝金属间化合物基高温自润滑复合材料, 国防保密专利, 专利号: ZL200810078954.9.
19. 杨军, 刘维民, 张兴华, 毕秦岭, 马吉强, 一种铁铝碳化钛复合材料的制备方法, 中国发明专利, 申请号: 201110440028.3.
20. 杨军, 刘维民, 马吉强, 毕秦岭, 李斐, 符立才, 朱圣宇, 一种高强度镍基高温自润滑复合材料的制备方法, 中国发明专利, 申请号: 201210240157.2.
21. 符立才, 杨军, 马吉强, 刘维民, 毕秦岭, 一种铜铁难混溶合金的制备方法, 中国发明专利, 申请号: 201210240150.0.
22. 毕秦岭, 刘维民, 孔令乾, 杨军, 一种氧化锆基高温自润滑块体材料, 中国发明专利, 申请号: 201210240160.4.
23. 刘维民, 毕秦岭, 牛牧野, 朱圣宇, 杨军, 马吉强, 镍硅金属间化合物基复合涂层的制备方法, 申请号: 201210389000.6.
出版信息
发表论文
第一和通讯作者
1. Yonghai Kang, Licai Fu*, Jiqiang Ma, Fei Li, Zhuhui Qiao, Jun Yang*, Qinling Bi, Weimin Liu, Strengthening of a high strength Fe85Ni15 alloy by tempering treatment, Mater. Sci. Eng. A, 2013, 576: 316-319.
2. Jiqiang Ma, Junying Hao, Licai Fu, Zhuhui Qiao, Jun Yang*, Weimin Liu*, Qinling Bi, Intrinsic self-lubricity of layered Ti3AlC2 under certain vacuum environment, Wear, 2013, 297: 824-828.
3. Jiqiang Ma, Fei Li, Jun Cheng, Licai Fu, Zhuhui Qiao*, Weimin Liu, Jun Yang*, Tribological behavior of Ti3AlC2 against SiC at ambient and elevated temperatures, Tribol. Lett, 2013
4. Fei Li, Jun Cheng, Zhuhui Qiao, Jiqiang Ma, Shengyu Zhu, Licai Fu, Jun Yang*, Weimin Liu*, A nickel-alloy-based high-temperature self-lubricating composite with simultaneously superior lubricity and high strength, Tribol. Lett, 2013, 49: 573-577.
5. Jun Cheng, Yuan Yu, Licai Fu, Fei Li, Zhuhui Qiao, Jinshan Li, Jun Yang*,Weimin Liu, Effect of TiB2 on dry-sliding tribological properties of TiAl intermetallics, Tribol. Int, 2013, 62: 91-99.
6. Xinghua Zhang, Jiqiang Ma, Licai Fu, Shengyu Zhu, Fei Li, Jun Yang*, Weimin Liu, High temperature wear resistance of Fe-28Al-5Cr alloy and its composites reinforced by TiC, Tribol. Int, 2013, 61: 48-55.
7. Xinghua Zhang, Jiqiang Ma, Fei Li, Licai Fu*, Zhuhui Qiao, Weimin Liu, Jun Yang*, Tribological behavior of Fe-28Al-5Cr alloy reinforced by TiC under acid environment, Tribol. Int, 2013, 66: 27-34.
8. Yonghai Kang, Jun Yang*, Licai Fu, Jiqiang Ma, Qinling Bi, Weimin Liu, Tribological behavior of Fe70Ni30 alloy with nano-scale twins under liquid paraffin lubrication, P. I. Mech. Eng. J-J. Eng. (Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology), 2013, 227: 60-66.
9. Jun Cheng, Jun Yang*, Jiqiang Ma, Qinling Bi, Xinghua Zhang, Licai Fu, Fei Li, Shengyu Zhu, Weimin Liu, The tribological behavior of a Ti-46Al-2Cr-2Nb alloy under liquid paraffine lubrication, Tribol. Lett, 2012, 46: 233-241.
10. Yonghai Kang, Jun Yang*, Jiqiang Ma, Licai Fu, Qinling Bi, Fei Li, Weimin Liu, Dry-sliding tribological behavior of Fe-Ni alloys, Tribol. Int, 2012, 51: 11-17.
11. Yonghai Kang, Jun Yang*, Jiqiang Ma, Qinling Bi, Licai Fu, Weimin Liu, Effects of cryogenic treatment on the mechanical and dry-sliding tribological behavior of an Fe75Ni25 alloy, P. I. Mech. Eng. J-J. Eng, 2012, 226: 71-78.
12. Yonghai Kang, Jun Yang*, Licai Fu, Qinling Bi, Weimin Liu, Mechanical properties and dry-sliding tribological behavior of partially twinned Fe70Ni30 alloy, Wear, 2012, 274-275: 395-400.
13. Jiqiang Ma, Jun Yang*, Xinhua Zhang, Qinling Bi, Licai Fu, Yonghai Kang, Weimin Liu, Combustion synthesis and characterization of bulk nanostructured Ni50Al17Fe33 alloy, Inter. J. Mater. Res, Accepted.
14. Xinghua Zhang, Jun Yang*, Jiqiang Ma, Junying Hao, Yongmin Liang, Qinling Bi, Weimin Liu, The tribological behavior of Fe-28Al-5Cr/TiC under liquid paraffine lubrication, Tribol. Lett, 2012, 45: 109-116.
15. Jun Cheng, Jun Yang*, Jiqiang Ma, Qinling Bi, Xinghua Zhang, Licai Fu, Fei Li, Shengyu Zhu, Weimin Liu, The tribological behavior of a Ti-46Al-2Cr-2Nb alloy under liquid paraffine lubrication, Tribol. Lett, 2012, 46: 233-241.
16. Xinghua Zhang, Jun Yang*, Jiqiang Ma, Qinling Bi, Jun Cheng, Yongmin Liang, Weimin Liu, Microstructures and mechanical properties of Fe-28Al-5Cr/TiC composites produced by hot-pressing sintering, Mater. Sci. Eng. A, 2011, 528: 6819-6824.
17. Xinghua Zhang, Jiqiang Ma, Jun Yang*, Qinling Bi, Weimin Liu, Dry-sliding tribological behaviour of Fe-28Al-5Cr/TiC composites, Wear, 2011, 271: 881-887.
18. Yonghai Kang, Lin Wang, Licai Fu, Jun Yang*, Qinling Bi, Weimin Liu, Combustion synthesis and characteristics of Fe-Ni alloys, Int. J. SHS, 2011, 20(2): 134-139.
19. Jiqiang Ma, Jun Yang*, Qinling Bi, Licai Fu, Yonghai Kang, Weimin Liu, Combustion synthesis of large bulk nanostructured Ni65Al21Cr14 alloy, J. Nanomater, 2011, 934801.
20. Lin Wang, Jun Yang*, Jiqiang Ma, Qinling Bi, Licai Fu, Junying Hao, Weimin Liu, Tribological properties of a nano-eutectic Fe1.87C0.13 alloy under water environment, Tribol. Lett, 2010, 40: 105-111.
21. Lin Wang, Jiqiang Ma, Jun Yang*, Qinling Bi, Licai Fu Weimin Liu, Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy, Wear, 2010, 268: 991-995.
22. Lin Wang, Jun Yang*, Qinling Bi, Jiqiang Ma, Licai Fu, Weimin Liu, The tribological properties of a nano-eutectic Fe1.87C0.13 alloy under liquid paraffine lubrication, Tribol. Lett, 2010, 37: 183-189.
23. Jiqiang Ma, Junying Hao, Qinling Bi, Licai Fu, Jun Yang*, Weimin Liu, Tribological properties of a Fe3Al material in sulfuric acid corrosive environment, Wear, 2010, 268: 264-268.
24. Jiqiang Ma, Jun Yang*, Qinling Bi, Weimin Liu, Preparation of an ultrafine-grained Fe-40Al intermetallic compound, Acta Metallurgica Sinica (English Letters), 2010, 23: 50-56.
25. Licai Fu, Jun Yang*, Qinling Bi, Jiqiang Ma, Weimin Liu, Combustion synthesis and characterization of bulk nanostructured Fe88Si12 alloy, IEEE Trans Nanotechnology, 2010, 9: 218-222.
26. Licai Fu, Jun Yang*, Qinling Bi, Weimin Liu, Ultrafine eutectic-dendrite composite bulk Fe-B alloy with enhanced ductility, Mater. Trans, 2009, 50: 2108-2110.
27. Licai Fu, Jun Yang*, Qinling Bi, Shengyu Zhu, Weimin Liu, Dry-sliding tribological properties of nano-eutectic Fe83B17 alloy, Tribol. Lett, 2009, 34: 185-191.
28. Licai Fu, Jun Yang*, Qinling Bi, Weimin Liu, Combustion synthesis immiscible nanostructured Fe-Cu alloy, J. Alloys Compd, 2009, 482, L22-L24.
29. Licai Fu, Jun Yang*, Qinling Bi, Laijun Li, Weimin Liu, Nanostructured hypoeutectic Fe-B alloy prepared by a self-propagating high temperature synthesis combining a rapid cooling technique, Nanoscale Res. Lett, 2009, 4: 11-16.
30. Licai Fu, Jun Yang*, Qinling Bi, Weimin Liu, Enhanced ductility of dendrite-ultrafine eutectic composite Fe3B alloy prepared by a self-propagating high temperature synthesis, Adv. Eng. Mater, 2009, 11: 194-197.
31. Jun Yang*, Jiqiang Ma, Weimin Liu*, Qinling Bi, Qunji Xue, Large-scale Fe–C nanoeutectic alloy prepared by a self-propagating high-temperature synthesis casting route, Scripta Mater, 2008, 58: 1074-1077.
32. Jun Yang*, Jiqiang Ma, Weimin Liu, Qinling Bi, Qunji Xue, Tribological properties of Fe3Al material under water environment, Mater. Sci. Eng. A, 2008, 490: 90-94.
33. Jun Ding, Jun Yang*, Qinling Bi, Jiqiang Ma, Weimin Liu, Qunji Xue, Microstructures and properties of FeAl-Fe3AlC0.5 composites prepared by SHS casting, J. Mater. Sci. Technol, 2008, 24(5): 733-736.
34. Laijun Li, Qinling Bi*, Jun Yang*, Licai Fu, Liping Wang, Shuncai Wang, Weimin Liu, Large-scale synthesis of Al–Cu–Fe submicron quasicrystals, Scripta Mater, 2008, 59: 587-590.
35. Licai Fu, Jun Yang*, Qinling Bi, Laijun Li, Weimin Liu, Microstructure and mechanical behavior of nano-eutectic Fe83B17 alloy prepared by a self-propagating high temperature synthesis combining rapid solidification, J. Phys. D: Appl. Phys, 2008, 41: 235401.
36. Jun Yang, Peiqing La*, Weimin Liu, Jiqiang Ma, Qunji Xue, Tribological properties of Fe3Al-Fe3AlC0.5 composites under dry sliding, Intermetallics, 2005, 13: 1184-1189.
37. Jun Yang, Peiqing La*, Weimin Liu, Yuan Hao, Microstructures and properties of Fe3Al-Fe3AlC0.5 composites fabricated by self-propagating high temperature synthesis casting, Mater. Sci. Eng. A, 2004, 382: 8-14.
38. Jun Yang*, Peiqing La, Weimin Liu, Qunji Xue, Tribological properties of FeAl intermetallics under dry sliding, Wear, 2004, 257: 104-109.
39. Peiqing La, Jun Yang, D. J. H. Cockayne, Weimin Liu, Qunji Xue, Bulk nanocrystalline Fe3Al-based material prepared by aluminothermic reaction, Adv. Mater, 2006, 18(6): 733-737.
40. 杨军, 燃烧合成熔化制备块体纳米晶材料, 中国基础科学, 2006, 8: 40.
其他：
1. Licai Fu*, Jun Yang, Qinling Bi, Weimin Liu, Dry reciprocal sliding wear behavior of nanocrystalline Fe88Si12 alloy, P. I. Mech. Eng. J-J. Eng. (Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology), 2013, 227: 79-83.
2. Licai Fu*, Jun Yang, Qinling Bi, Hongbo Zeng, Weimin Liu, Sliding wear behaviour of nanocrystalline Fe88Si12 alloy under low load and speed, Tribol. Lett, 2012, 48: 329-335.
3. Xiaoqiang Liu, Jun Yang, Junying Hao*, Jianyun Zheng, Qiuyu Gong, Weimin Liu, Microstructure, mechanical and tribological properties of Si and Al co-doped hydrogenated amorphous carbon films deposited at various bias voltages, Surf. Coat. Tech, 2012, 206: 4119-4125.
4. Xiaoqiang Liu, Jun Yang, Junying Hao*, Jianyun Zheng, Qiuyu Gong, Weimin Liu*, A near-frictionless and extremely elastic hydrogenated amorphous carbon film with self-assembled dual-nanostructure, Adv. Mater, 2012, 24: 4614-4617.
5. Licai Fu, Jun Yang, Qinling Bi, Weimin Liu, Microstructure and mechanical behavior of (Fe88Si12)95Al5 alloy prepared by an aluminothermics, Mater. Sci. Technol, 2011, 27: 1482-1484..
6. Xiaoqiang Liu, Jun Yang, Junying Hao, Weimin Liu, Microstructure and properties of nc-TiC/a-C:H films deposited by radio frequency reactive sputtering, Mater. Sci. Technol, 2011, 27: 1669-1673.
7. Licai Fu, Jun Yang, Qinling Bi, Weimin Liu, Microstructure and mechanical behavior of nanostructured composite Cu60Fe40 alloy, Phil. Mag. Lett, 2011, 91(2): 78-85.
8. Licai Fu, Jun Yang, Qinling Bi, Weimin Liu, Improved wear resistance of dendrite composite eutectic Fe-B alloy, J. Tribol, 2011, 133(4): 041602.
9. Licai Fu, Jun Yang, Qinling Bi, Jiqiang Ma, Weimin Liu, Tribological performance of Fe67B33 alloy prepared by a self-propagating high temperature synthesis technique, Tribol. Lett, 2010, 37: 43-47.
10. Licai Fu, Jun Yang, Qinling Bi, Weimin Liu, Deformation behavior of bulk nanocrystalline Fe88Si12 alloy, J. Alloys Compd, 2010, 505: 456-458.
11. Licai Fu, Jun Yang, Qinling Bi, Weimin Liu, Pressure-assisted combustion synthesis of large-scale nanostructured Fe74Si24B2 alloy, Physica B, 2010, 405: 4497-4499.
12. Shengyu Zhu, Qinling Bi, Hairong Wu, Jun Yang, Weimin Liu, NiAl matrix high temperature self-lubricating composite, Tribol. Lett, 2011, 41: 535-540.
13. Shengyu Zhu, Qinling Bi, Jun Yang, Weimin Liu, Qunji Xue, Ni3Al matrix high temperature self-lubricating composites, Tribol. Int, 2011, 44: 445-453.
14. Qinling Bi, Weimin Liu, Jun Yang, Jiqiang Ma, Qunji Xue, Tribological properties of Ni-17.5Si-29.3Cr alloy at room and elevated temperature, Tribol. Int, 2010, 43: 136-143.
15. Qinling Bi, Weimin Liu, Jiqiang Ma, Jun Yang, Yuping Pu, Qunji Xue, Tribocorrosion behaviour of Ni–17.5Si–29.3Cr alloy in sulfuric acid solution, Tribol. Int, 2009, 42: 1081-1087.
16. Laijun Li, Qinling Bi, Jun Yang, Weimin Liu, Qunji Xue, Fabrication of bulk Al2O3 dispersed ultrafine-grained Cu matrix composite by self-propagating high-temperature synthesis casting route, Mater. Lett, 2008, 62: 2458-2460.
17. Baiming Chen, Qinling Bi, Jun Yang, Yanqiu Xia, Jingcheng Hao, Tribological properties of Cu-based composites and in-situ synthesis of TiN/TiB2, Mater. Sci. Eng. A, 2008, 491: 315-320.
18. Baiming Chen, Qinling Bi, Jun Yang, Yanqiu Xia, Jingcheng Hao, Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction composites, Tribol. Int, 2008, 41: 1145-1152.
19. Yuping Pu, Qinling Bi, Jun Yang, Jianmin Chen, Qunji Xue, Effects of C alloying on microstructure and properties of Ni-Si-Cr ternary alloys, Mater. Sci. Eng. A, 2008, 496: 316-322.
20. Qinling Bi, Weimin Liu, Jun Yang, Qunji Xue, Sliding wear of Ni–17.5Si–29.3Cr alloy under water lubrication, Tribol. Lett, 2005, 20: 149-156.
21. Peiqing La, Jiqiang Ma, Yuntian T. Zhu, Jun Yang, Weimin Liu, Qunji Xue, Ruslan Z. Valiev, Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation, Acta Mater, 2005, 53: 5167-5173.
22. 薛群基, 杨军, 喇培清, 刘维民, 金属间化合物摩擦学研究进展, 材料导报, 2001, 15(7): 12-14.
出版著作
1. Jun Yang, Weimin Liu, Licai Fu, Qinling Bi, Qunji Xue. Chapter 11: Combustion synthesis of alloys. In: Maximilian Lackner, editor. Combustion synthesis: novel routes to novel materials (E’book), Bentham, 2010, 132-140.
2. Qinling Bi, Licai Fu, Jun Yang, Weimin Liu, Qunji Xue. Chapter 8: Combustion synthesis melt-casting. In: Maximilian Lackner, editor. Combustion synthesis: novel routes to novel materials (E’book), Bentham, 2010, 98-107.
科研活动
科研项目
（2） 原位镍基高温自润滑复合厚涂层的制备和摩擦学性能研究，主持，国家级，2013-01--2016-12
（3） 高温润滑与抗磨损材料及表面覆层技术，主持，专项级，2013-01--2017-12
（4） 突破现有材料使役极限的战略高技术用系列润滑和防护先进材料，主持，部委级，2012-01--2016-12
（5） 高温自润滑材料研制，主持，其他级，2011-09--2012-12
（6） 燃烧合成高强度高韧性Fe-C和Fe-Ni纳米晶材料及性能研究，主持，国家级，2009-01--2011-12
（7） ***集成润滑技术研究，参与，国家级，2008-07--2011-12
（8） 高温润滑与抗磨损材料及表面覆层技术，主持，专项级，2008-01--2012-12
（9） ***CE环的研制，主持，国家级，2007-01--2009-12
参与会议
（2） Combustion synthesis of nanostructured metals，2011-10，Jun Yang
指导学生
已指导学生
王林 硕士研究生 070304-物理化学
马吉强 博士研究生 070304-物理化学
张兴华 博士研究生 070304-物理化学
康永海 博士研究生 070304-物理化学
现指导学生
甄金明 硕士研究生 085204-材料工程
王帅 硕士研究生 070304-物理化学