080705-制冷及低温工程

低温系统、低温力学、低温材料

2006-07--2010-11   香港理工大学   获得博士学位
2000-09--2003-12   中国科学院理化技术研究所   获得硕士学位
1996-09--2000-07   聊城大学   获得学士学位

   

2022-08~现在, 中国科学院理化技术研究所, 任研究员
2013-08~2022-08,中国科学院理化技术研究所, 任副研究员
2010-12~2013-08,中国科学院理化技术研究所, 任助理研究员
2006-07~2010-11,香港理工大学, 获得博士学位
2004-07~2006-06,中国科学院理化技术研究所, 任研究实习员
2000-09~2003-12,中国科学院理化技术研究所, 获得硕士学位
1996-09~2000-07,聊城大学, 获得学士学位

   

（1） Structure optimization and performance evaluation of CS CICC jacket based on N50H austenitic steel for future fusion reactor, Cryogenics, 2024, 第 8 作者
（2） Mechanical and physical properties of modified N50 steel at cryogenic temperatures, Cryogenics, 2024, 第 3 作者
（3） Mechanical performance and deformation mechanisms of ultrastrong yield strength Fe-Cr-Ni-Mn-N austenitic stainless steel at 4.2 Kelvin, Journal of Materials Science and Technology, 2024, 第 12 作者  通讯作者
（4） Effect of the second curing cycle on performance of superconducting magnet insulating system, Cryogenics, 2024, 第 3 作者  通讯作者
（5） Visualized investigation of nitrogen pulsating heat pipe, Cryogenics, 2023, 第 6 作者
（6） Investigation of real-time strain responses of the insulating system of superconducting magnets by using fiber Bragg grating sensors, Journal of Applied Physics, 2023, 第 11 作者
（7） The Research on high-strength CICC jackets with YS>1500 MPa at 4.2 K for future fusion applications, Nuclear Materials and Energy, 2023, 第 7 作者
（8） Study on the welding properties of modified N50 CICC jacket for future fusion applications, Journal of Materials Science and Technology, 2023, 第 7 作者
（9） High cryogenic ductility of the high entropy alloy CoCrFeNiAl0.1Ti0.05 at 77 K, Journal of Applied Physics, 2023, 第 5 作者
（10） A tensile property measuring system for miniaturized samples from 300 K to 77 based on pulse tube cryocooler, Journal of Instrumentation, 2023, 第 4 作者
（11） Preliminary development of emissivity measurement system at low temperature based on radiometric method,, Cryogenics, 2023, 第 5 作者
（12） Development of two-dimensional temperature field solution method based on the stress-strain response of 316LN stainless steel at cryogenic temperatures, Cryogenics, 2023, 第 6 作者
（13） Mechanical properties evaluation of ReBCO CICC jacket based on super-austenitic stainless steel for CFETR high-field magnet, Nuclear Materials and Energy, 2023, 第 4 作者
（14） Numerical Simulation and Experimental Validation of Internal Heating in Vacuum Pressure Impregnation Process for High Field Coil���IEEE Transactions on Applied Superconductivity, IEEE Transactions on Applied Superconductivity, 2023, 第 4 作者
（15） Effect of large redundant volume on the performance of multiple turns helium pulsating heat pipe, Cryogenics, 2023, 第 4 作者
（16） Enhancing cryogenic thermal conductivity of epoxy composites through the incorporation of Boron Nitride nanosheets/nanodiamond aerogels prepared by directional freezing method, Polymer Composites, 2023, 第 4 作者
（17） Dissimilar laser welding of CrMnFeCoNi high entropy alloy and 316LN stainless steel for cryogenic application, Journal of Materials Science and Technology, 2023, 第 7 作者
（18） Investigation on cryogenic mechanical properties of basalt fiber-reinforced epoxy composites, Cryogenics, 2023, 第 3 作者  通讯作者
（19） Physical properties of a high manganese austenitic steel Fe-30%Mn-1%C at cryogenic temperatures, Cryogenics, 2023, 第 2 作者  通讯作者
（20） Microstructure evolution of austenitic stainless steels under high-cycle-fatigue loading at deep cryogenic temperature, Scripta Materialia, 2023, 第 9 作者  通讯作者
（21） Strain monitoring of ZrW2O8 reinforced epoxy composites by using embedded fiber Bragg grating sensor, ICEC28-ICMC2022, 2022, 第 10 作者  通讯作者
（22） Low-temperature tensile and impact properties of Fe24Mn0.45C high manganese steel, ICEC28-ICMC2022, 2022, 第 2 作者  通讯作者
（23） Numerical study of a single-loop nitrogen pulsating heat pipe, ICEC28-ICMC2022, 2022, 第 5 作者
（24） Effect of flexible thermal connections on temperature oscillation in the low temperature range of GM cryocooler, ICEC28-ICMC2022, 2022, 第 7 作者
（25） Mechanical properties and microstructure evolution of cryogenic pre-strained 316LN stainless steel, Cryogenics, 2022, 第 5 作者
（26） Mechanical characterization of low-carbon steels for high-field accelerator magnets: application to Nb3Sn low-�� quadrupole MQXF, IEEE Transactions on Applied Superconductivity, 2022, 第 11 作者
（27） Ne-liquefaction system development for the 940 nm infrared optical characteristics measurement, Cryogenics, 2022, 第 7 作者  通讯作者
（28） Monitoring strain response of epoxy resin during curing and cooling using an embedded strain gauge, Sensors, 2021, 第 9 作者  通讯作者
（29） Study on cryogenic mechanical properties between superconducting wires and resins for MRI superconducting magnet, Cryogenics, 2021, 第 3 作者
（30） The microstructures and mechanical properties of dissimilar laser welding of copper and 316L stainless steel with Ni interlayer, Cryogenics, 2021, 第 4 作者  通讯作者
（31） Experimental study on strain sensitivity of Internal-Tin Nb3Sn superconducting strand based on non-destructive technology, Physica C, 2021, 第 3 作者  通讯作者
（32） Measurement of thermal expansions of closed-cell polyurethane rigid foams at cryogenic temperatures with an extensometer technique, AIP Advances, 2021, 第 5 作者  通讯作者
（33） Near-zero temperature coefficient of resistivity in LaFe9.45Al3.55 compound over 5-300 K, Applied Physics Letters, 2020, 第 3 作者
（34） Influence of pre-strain on cryogenic tensile properties of 316LN austenitic stainless steel, Cryogenics, 2020, 第 2 作者
（35） Evaluation of fatigue crack propagation behavior of 316LN TIG weldments at liquid helium temperature, Cryogenics, 2020, 第 1 作者
（36） Microstructure and mechanical properties of the enclosure welding joints for ITER correction coils cases, IEEE Transactions on Applied Superconductivity, 2020, 第 4 作者  通讯作者
（37） A comparative study of compositions and microstructures of two types internal-tin process Nb3Sn wires, Cryogenics, 2020, 第 2 作者
（38） A new enclosed method for transverse mechanical testing on CICC conductors, IEEE Transactions on Applied Superconductivity, 2020, 第 9 作者
（39） Research on mechanical properties of high-performance cable-in-conduit conductors with different design, Superconductor Science and Technology, 2020, 第 9 作者
（40） Flashover characteristics of G-11 at different cryogenic temperatures, IOP Conf. Series: Materials Science and Engineering, 2019, 2019, 第 6 作者
（41） DC surface flashover characteristics of G-11CR in vacuum from room temperature to cryogenic temperatures, Cryogenics, 2019, 第 7 作者
（42） Analysis of the fracture mechanism at cryogenic temperatures of thick 316LN laser welded joints, Fusion Engineering and Design, 2019, 第 3 作者  通讯作者

（ 1 ） 低温材料基础, Fundamentals of Cryogenic Materials, 电子工业出版社, 2024-01, 第 2 作者

   

（ 1 ） 极低温复材结构服役性能声-光-热多源集成原位表征、静动态力学测试技术与评价方法, 参与, 国家任务, 2023-06--2026-05
（ 2 ） 不锈钢成分设计及性能研究, 负责人, 中国科学院计划, 2021-01--2023-12
（ 3 ） 大型超导磁体绝缘系统成型实时结构健康检测研究, 负责人, 国家任务, 2019-01--2022-12
（ 4 ） 导体性能评估及相关低温实验技术研究, 负责人, 国家任务, 2018-08--2022-12
（ 5 ） 未来超导磁体用无机纳米颗粒掺杂改性氰酸酯/环氧树脂绝缘材料低温电性能研究, 负责人, 国家任务, 2014-01--2017-12