基本信息
付经伦  女  硕导  中国科学院工程热物理研究所
email: fujl@mail.etp.ac.cn
address: 北京北四环西路11号
postalCode:

招生信息

   
招生专业
080703-动力机械及工程
招生方向
气动热力学

教育背景

2016-12--2018-01   美国中佛罗里达大学   访问学者
2004-03--2008-02   中科院工程热物理研究所   工学博士

工作经历

   
工作简历
2021-05~现在, 中科院工程热物理研究所, 项目研究员
2016-12~2018-01,美国中佛罗里达大学, 访问学者
2010-12~2021-04,中科院工程热物理研究所, 副研究员
2008-02~2011-01,中科院工程热物理研究所, 助理研究员
2004-03~2008-02,中科院工程热物理研究所, 工学博士
社会兼职
2022-01-01-今,北京市自然基金委专家,
2018-09-18-今,Editorial Board Membership of Journal of Mechanical Engineering Research, Editorial Board Membership
2018-01-01-今,ASME Turbo Expro评审专家,
2010-01-01-今,国家自然基金委评审专家,

教授课程

航空发动机及燃气轮机导论
燃气轮机导论

专利与奖励

   
奖励信息
(1) 优秀论文奖, 一等奖, 专项, 2021
(2) 优秀论文奖, 一等奖, 专项, 2021
(3) 特别贡献奖, 特等奖, 专项, 2021
专利成果
( 1 ) 端壁可调节的扩压器, 2019, 第 1 作者, 专利号: 201910680794.3

( 2 ) 一种新型冷却结构, 2018, 第 1 作者, 专利号: ZL2018540811

( 3 ) 一种离心径流透平, 2017, 第 1 作者, 专利号: 201620862705.9

( 4 ) 一种轴流透平与单侧径向排汽/气系统设计方法, 2016, 第 1 作者, 专利号: 201410260919.4

( 5 ) 一种汽轮机单侧排汽系统扩压器端壁, 2015, 第 1 作者, 专利号: 201210024587

( 6 ) 轴流透平与单侧径向排汽(气)一体化气动设计方法, 2014, 第 1 作者, 专利号: 201010252329.9

出版信息

   
发表论文
(1) 基于时间序列图谱化的轴承故障诊断方法研究, 2022, 第 1 作者
(2) 一种基于图像的叶型参数测量方法, 发电技术, 2022, 第 3 作者
(3) 大型航空构件专用热氢处理炉流-热-固耦合仿真分析, Fluid-thermal-solid coupling simulation analysis of thermohydrogen treatment furnace specially for large aviation components, 金属热处理, 2021, 第 3 作者
(4) 基于计算机视觉的三维重建技术在燃气轮机行业的应用及展望, 发电技术, 2021, 第 2 作者
(5) Discharge coefficients and aerodynamic losses for cylindrical and cratered film-cooling holes with various coolant crossflow orientations, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2021, 第 3 作者
(6) 燃气轮机排气扩压器研究现状, 发电技术, 2021, 第 1 作者
(7) 冷却结构参数对气膜/冲击复合结构冷却性能的影响研究, Numerical Investigation on the Influence of Cooling Configurations on Film/Impingement Cooling Performance, 工程热物理学报, 2020, 第 2 作者
(8) 冷却结构参数对气膜冲击负荷结构冷却性能的影响研究, 工程热物理学报, 2020, 第 1 作者
(9) 扇形气膜孔+冲击复合冷却气热耦合研究, Numerical Investigation on the Conjugate Heat Transfer of Shaped Film Hole and Impingement Combined Cooling Scheme, 工程热物理学报, 2020, 第 5 作者
(10) Investigation of the Conjugate Heat Transfer and Flow Field for a Flat Plate with Combined Film and Impingement Cooling, Investigation of the Conjugate Heat Transfer and Flow Field for a Flat Plate with Combined Film and Impingement Cooling, JOURNALOFTHERMALSCIENCE, 2020, 通讯作者
(11) 应用于有机朗肯循环的新型小流量低转速离心膨胀机特性研究, Characteristics of a novel small flow and low speed centrifugal expander used for organic Rankine cycle, 热力发电, 2019, 第 3 作者
(12) Guidelines for Optimal Selection of Subcritical Low-Temperature Geothermal Organic Rankine Cycle Configuration Considering Reinjection Temperature Limits, ENERGIES, 2018, 通讯作者
(13) Performance optimization of low-temperature geothermal organic Rankine cycles using axial turbine isentropic efficiency correlation, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 第 2 作者
(14) AERO-THERMAL PERFORMANCE OF A ROTOR BLADE CASCADE WITH FILM COOLING IN PASSAGE ENDWALL, PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5A, 2018, 通讯作者
(15) 燃气轮机透平叶片流-热-固耦合分析及蠕变寿命预测, Fluid-thermal-mechanical Coupling Analysis and Creep Life Prediction of Gas Turbine Blade, 燃气轮机技术, 2018, 第 5 作者
(16) 燃气轮机透平叶片流固藕合分析及蠕变寿命预测, 燃气轮机技术, 2018, 第 1 作者
(17) Guidelines for optimal selection of subcritical low-temperature geothermal organic rankine cycle configuration considering reinjecttion temperature limit, energies, 2018, 通讯作者
(18) Impacts of Film Cooling Parameters On Aerodynamic Loss of a Cooled Turbine Vane, Global Power and Propulsion Society forum-2017- 127, 2017, 
(19) 耦合低温热源的亚临界有机朗肯循环系统参数优化, Parameter Optimization of the Subcritical Organic Rankine Cycle System Coupled With Low-Temperature Heat Source, 工程热物理学报, 2017, 第 2 作者
(20) Investigations on the Improving Aerodynamic Performances of Last Stage Steam Turbine and Exhaust Hood under Design and Off Design Conditions, JOURNAL OF THERMAL SCIENCE, 2015, 通讯作者
(21) 气膜和冲击复合冷却结构耦合传热数值研究, Numerical Investigation of Conjugate Heat Transfer for Combined Film and Impingement Cooling, 工程热物理学报, 2015, 第 2 作者
(22) Investigations on the coupling flow between full-scale last-stage steam turbine and low-pressure exhaust hood, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2015, 通讯作者
(23) Aerodynamic Optimization of the Diffuser Towards Improving the Performanc of Turbine and Exhaust, ASME Turbo Expo, 2014, 
(24) Unsteady interactions between axial turbine and non-axisymmetric exhaust hood under different operational conditions, ASME Journal of Turbomachinery, 2014, 第 1 作者
(25) 气膜和冲击复合冷却结构耦合传热数值研究, 2014年工程热物理学会, 2014, 第 2 作者
(26) Investigations on the Transition Flow Heat Transfer in a Turbine Inlet Guide Vane, the Asian Joint Workshop on Thermophysics and Fluid Science, 2014, 
(27) Multi-Field Coupling Investigation of Film Cooling with Different Hole Configuration, Proceedings of the 11th International Symposium on Experimental Computaional Aerothermodynamics of Internal Flows, 2013, 
(28) 雷诺数对微透平性能影响的数值模拟, Numerical Simulation of the Effect of Reynolds Number on Micro Radial Turbine Performance, 燃气轮机技术, 2012, 第 2 作者
(29) Unsteady Interactions Between Axial Turbine and Nonaxisymmetric Exhaust Hood Under Different Operational Conditions, JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 通讯作者
(30) 小型向心透平一维和三维设计分析, One and three-dimensional designs and analyses of small radial turbines, 航空动力学报, 2012, 第 2 作者
(31) 叶顶间隙对超微型透平性能影响的数值模拟, Numerical Simulation of the Effect of Tip Leakage Flow on the Micro Radial-Flow Turbine Performance, 工程热物理学报, 2011, 第 2 作者
(32) 叶顶间隙对超微型透平性能影响数值模拟, 中国工程热物理学会(热机气动热力学), 2010, 第 3 作者
(33) 汽轮机排汽系统优化设计与性能分析, OPTIMAL DESIGN AND PERFORMANCE ANALYSIS OF STEAM TURBINE EXHAUST SYSTEM, 工程热物理学报, 2009, 第 2 作者
(34) 轴流透平与排汽系统间流场相互作用研究, INVESTIGATION OF INTERACTIONS BETWEEN AXIAL TURBINE AND EXHAUST HOOD, 工程热物理学报, 2008, 第 1 作者
(35) Experimental and Numerical Investigation of Interactions Between Axial Turbine and Non-Axisymmetric Exhaust Hood, PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 6, PT A, 2008, 通讯作者
(36) Influences of Inflow Condition on Non-Axisymmetric Flows in Turbine Exhaust Hoods, Influences of Inflow Condition on Non-Axisymmetric Flows in Turbine Exhaust Hoods, JOURNAL OF THERMAL SCIENCE, 2008, 通讯作者
(37) 来流条件对排汽缸内非轴对称流动的影响, Influence of Entering Flow Conditions on the Non-axial Symmetric Flow in Exhaust Hoods, 动力工程, 2007, 第 1 作者
(38) 进口漩流对透平排汽缸内部流动的影响, INFLUENCES OF INLET SWIRL ON NON-AXISYMMETRIC FLOWS IN TURBINE EXHAUST HOODS, 工程热物理学报, 2007, 第 1 作者
(39) 基于虚拟仪器及PXI技术的传感器标定, 工程热物理学报, 2006, 第 1 作者
(40) 柴油机组合进气道布置位置优化研究, Position Optimization of the Combination Intake Port of Diesel Engine, 车用发动机, 2005, 第 3 作者

科研活动

   
科研项目
( 1 ) 小型涡扇发动机涡轮叶, 负责人, 研究所自主部署, 2013-01--2016-12
( 2 ) 汽轮机排气缸优化研究, 负责人, 境内委托项目, 2014-01--2016-12
( 3 ) 35MW级舰用燃气轮机轴流透平关键技术研究, 负责人, 中国科学院计划, 2016-01--2018-12
( 4 ) 小流量工况下透平与非轴对称排气(汽)系统流动控制研究, 负责人, 国家任务, 2018-01--2021-12
( 5 ) 40MWW燃气轮机技术研究, 参与, 境内委托项目, 2017-11--2018-12
( 6 ) 应用于有机朗肯循的新型高负荷小流量涡轮膨胀机性能研究, 负责人, 地方任务, 2018-01--2018-06
( 7 ) 燃气轮机高温透平耦合传热特性研究, 负责人, 地方任务, 2018-01--2018-06
( 8 ) 排气系统与末级透平耦合作用机理及匹配设计方法研究, 负责人, 国家任务, 2021-01--2024-12
( 9 ) 面向盐化工行业的氢-光-储源荷协同低碳智慧能源系统重大科技示范, 负责人, 地方任务, 2022-07--2025-06
( 10 ) 面向增材制造的燃机透平冷却叶片设计技术研究, 负责人, 地方任务, 2021-08--2024-02
参与会议
(1)investigation of the effect caused by biot number and internal impingement configurations with film and impingement cooling   2018-08-20
(2)AERO-THERMAL PERFORMANCE OF A ROTOR BLADE CASCADE WITH FILM COOLING IN PASSAGE   2018-06-15
(3)Investigations on the Improving Aerodynamic Performances of Last Stage Steam Turbine and Exhaust under Design and Off Design Conditions   2015-06-13
(4)Investigation of Tip Clearance Effects on the Flow and Performance of a Micro Radial Turbine   Jian-Jun LIU, Jing-Lun FU and Yu-Xin SHE   2011-07-04