080102-固体力学

疲劳断裂，材料力学，结构完整性评定

2005-09--2009-06   中国科学院力学研究所   博士研究生

   

2018-07~现在, 中国科学院力学研究所, 高级工程师（正研级）
2013-01~2018-06,瑞士PSI研究所, 研究员
2009-08~2012-12,瑞士PSI研究所, 博士后
2005-09~2009-06,中国科学院力学研究所, 博士研究生

   

（1） 市场监管科研成果奖三等奖, 三等奖, 部委级, 2021
（2） 欧洲结构完整性协会优秀论文, 一等奖, 其他, 2019
（3） ASME PVP2016年优秀论文, , 其他, 2016
（4） Nuclear Engineering Design高引论文, 其他, 2016
（5） 瑞士PSI优秀员工, 其他, 2013

   

（1） Microstructural evolution and formation of fine grains during fatigue crack initiation process of laser powder bed fusion Ni-based superalloy, Additive Manufacturing, 2024, 
（2） Deformation behavior, twinning propensity model, and twinnability map for laser powder bed fused austenitic steel homogenized by hot isostatic pressing, International Journal of Plasticity, 2024, 
（3） Microstructural insights into fatigue short crack propagation resistance and rate fluctuation in a Ni-based superalloy manufactured by laser powder bed fusion, International Journal of Plasticity, 2023, 
（4） A framework to simulate the crack initiation and propagation in very-high-cycle fatigue of an additively manufactured AlSi10Mg alloy, Journal of the Mechanics and Physics of Solids, 2023, 
（5） Laser powder bed fused 304L steel shot-peened with various ceramic shot sizes: Surface/subsurface characteristics, International Journal of Plasticity, 2023, 
（6） High-cycle and very-high-cycle fatigue lifetime prediction of additively manufactured AlSi10Mg via crystal plasticity finite element method, INTERNATIONAL JOURNAL OF FATIGUE, 2022, 第 6 作者  通讯作者
（7） Microstructure evolution and very-high-cycle fatigue crack initiation behavior of a structural steel with two loading intermittence modes, INTERNATIONAL JOURNAL OF FATIGUE, 2022, 第 4 作者  通讯作者
（8） Defect-induced cracking and fine granular characteristics in very-high-cycle fatigue of laser powder bed fusion AlSi10Mg alloy, International Journal of Fatigue, 2022, 第 3 作者  通讯作者
（9） Machine learning based very-high-cycle fatigue life prediction of Ti-6Al-4V alloy fabricated by selective laser melting, International Journal of Fatigue, 2022, 第 3 作者  通讯作者
（10） Fatigue limit evaluation via infrared thermography for a high strength steel with two strength levels, ENGINEERING FRACTURE MECHANICS, 2022, 第 6 作者
（11） Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM, INTERNATIONAL JOURNAL OF FATIGUE, 2022, 第 3 作者
（12） 考虑尺寸效应和加载方式的砂岩抗拉强度统计模型, A Statistical Model of Tensile Strength of Sandstone in Consideration of Size Effect and Loading Mode, 长江科学院院报, 2022, 第 4 作者
（13） 混凝土抗拉与抗压强度尺寸效应统计模型, 矿业科学学报, 2022, 第 3 作者
（14） 混凝土抗拉与抗压强度尺寸效应统计模型, A statistical model of size effect on concrete tensile and compressive strength, 矿业科学学报, 2022, 第 3 作者
（15） Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selected laser melting: Crystal plasticity modeling, INTERNATIONAL JOURNAL OF FATIGUE, 2021, 第 4 作者  通讯作者
（16） Nanograin formation in dimple ridges due to local severe-plastic-deformation during ductile fracture, SCRIPTA MATERIALIA, 2021, 第 2 作者
（17） Crack initiation mechanisms under two stress ratios up to very-high-cycle fatigue regime for a selective laser melted Ti-6Al-4V, INTERNATIONAL JOURNAL OF FATIGUE, 2021, 第 3 作者
（18） Standardized Weibull statistics of ceramic strength, CERAMICS INTERNATIONAL, 2021, 第 4 作者  通讯作者
（19） Study on damage tolerance and remain fatigue life of shattered rim of railway wheels, ENGINEERING FAILURE ANALYSIS, 2021, 第 6 作者  通讯作者
（20） Effects of inclusion size and stress ratio on the very-high-cycle fatigue behavior of pearlitic steel, INTERNATIONAL JOURNAL OF FATIGUE, 2021, 第 2 作者
（21） Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2021, 第 2 作者
（22） Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2021, 第 4 作者
（23） Very-high-cycle fatigue behavior of Ti-6Al-4V manufactured by selective laser melting: Effect of build orientation, INTERNATIONAL JOURNAL OF FATIGUE, 2020, 第 1 作者
（24） Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress, INTERNATIONAL JOURNAL OF FATIGUE, 2020, 第 1 作者
（25） The mechanism of internal fatigue-crack initiation and early growth in a titanium alloy with lamellar and equiaxed microstructure, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 第 3 作者
（26） Temperature effect on fracture toughness of CLF-1 steel with miniature three-point bend specimens, JOURNAL OF NUCLEAR MATERIALS, 2020, 第 5 作者
（27） Special Issue ESIAM19 International Journal of Fatigue, INTERNATIONAL JOURNAL OF FATIGUE, 2020, 第 5 作者
（28） In-situ investigation on fatigue behaviors of Ti-6Al-4V manufactured by selective laser melting, INTERNATIONAL JOURNAL OF FATIGUE, 2020, 第 1 作者  通讯作者
（29） C(t) dominance of the mixed I/II creep crack: Part II. Extensive creep, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 第 5 作者
（30） Nanograin formation in dimple ridges due to local severe-plastic-deformation during ductile fracture, SCRIPTA MATERIALIA, 2020, 第 2 作者
（31） Estimation of C*-Integral for Central Cracked Plate Under Biaxial Loading, INTERNATIONAL JOURNAL OF APPLIED MECHANICS, 2020, 第 5 作者
（32） Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V, FATIGUEFRACTUREOFENGINEERINGMATERIALSSTRUCTURES, 2020, 第 2 作者
（33） Statistics of ceramic strength: Use ordinary Weibull distribution function or Weibull statistical fracture theory?, CERAMICS INTERNATIONAL, 2020, 第 4 作者  通讯作者
（34） Special issue ESIAM19 theoretical and applied fracture mechanics, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 第 6 作者
（35） Probabilistic framework for fatigue life assessment of notched components under size effects, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 第 4 作者
（36） An alternative numerical method for calculating C* parameter under mode I loading utilizing rate-dependent energy release rate, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 第 6 作者  通讯作者
（37） Influence of hierarchical porosity on the mechanical properties of porous woven composites under thermomechanical loading, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2020, 第 3 作者  通讯作者
（38） Fatigue model of domestic 316LN steel in simulated primary coolant environment of CAP1400, INTERNATIONAL JOURNAL OF FATIGUE, 2020, 第 2 作者  通讯作者
（39） Internal crack characteristics in very-high-cycle fatigue of a gradient structured titanium alloy, SCIENTIFIC REPORTS, 2020, 第 2 作者
（40） Synchrotron X-ray micro-computed tomography imaging of 3D re-entrant micro lattice during in situ micro compression experimental process, MATERIALSDESIGN, 2020, 第 8 作者
（41） A simplified method for parameters calibration of the new local approach model for cleavage fracture in a ferritic steel, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 第 4 作者  通讯作者
（42） Statistical size scaling of breakage strength of irregularly-shaped particles, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 第 1 作者
（43） Multiaxial fatigue analysis of notched components using combined critical plane and critical distance approach, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 第 3 作者
（44） Irradiation effect on impact fracture behavior of A508-3 steel in ductile-to-brittle transition range, ENGINEERING FAILURE ANALYSIS, 2019, 第 3 作者  通讯作者
（45） Statistical size scaling of compressive strength of quasi-brittle materials incorporating specimen length-to-diameter ratio effect, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 第 2 作者  通讯作者
（46） Specimen size effect on the ductile-brittle transition reference temperature of A508-3 steel, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 第 3 作者  通讯作者
（47） C(t) dominance of the mixed I/II creep crack: Part I. Transient creep, THEORETICALANDAPPLIEDFRACTUREMECHANICS, 2019, 第 4 作者
（48） Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review, MATERIALS & DESIGN, 2019, 第 3 作者  通讯作者
（49） Formation and migration of helium pair in bcc Fe from first principle calculations, COMPUTATIONAL MATERIALS SCIENCE, 2019, 第 5 作者
（50） In-situ SEM investigation on fatigue behaviors of additive manufactured Al-Si10-Mg alloy at elevated temperature, ENGINEERING FRACTURE MECHANICS, 2019, 第 3 作者
（51） A Statistical Model of Cleavage Fracture Toughness of Ferritic Steel DIN 22NiMoCr37 at Different Temperatures, MATERIALS, 2019, 第 1 作者
（52） Mechanical behaviors of SLM additive manufactured octet-truss and truncated-octahedron lattice structures with uniform and taper beams, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 第 7 作者  通讯作者
（53） Weibull stress analysis in local approach to fracture, THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 第 4 作者  通讯作者
（54） Modelling of reactor pressure vessel subjected to pressurized thermal shock using 3D-XFEM, NUCLEAR ENGINEERING AND DESIGN, 2019, 第 3 作者
（55） Analysis of the effect of out-of-phase biaxial fatigue loads on crack paths in cruciform specimens using XFEM, INTERNATIONAL JOURNAL OF FATIGUE, 2019, 第 2 作者
（56） Comparison of constraint analyses with global and local approaches under uniaxial and biaxial loadings, EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2018, 第 1 作者  通讯作者
（57） Non-proportional size scaling of strength of concrete in uniaxial and biaxial loading conditions, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 
（58） Effect of non-uniform reactor cooling on fracture and constraint of a reactor pressure vessel, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 第 1 作者  通讯作者
（59） Statistical assessment of notch toughness against cleavage fracture of ferritic steels, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 
（60） On the temperature independence of statistical model parameters for cleavage fracture in ferritic steels, PHILOSOPHICAL MAGAZINE, 2018, 第 1 作者
（61） Mechanical properties of anti-tetrachiral auxetic stents, COMPOSITE STRUCTURES, 2018, 第 5 作者  通讯作者
（62） A new critical plane-energy model for multiaxial fatigue life prediction of turbine disc alloys, ENGINEERING FAILURE ANALYSIS, 2018, 第 5 作者
（63） Constraint Assessment for Specimens Tested Under Uniaxial and Biaxial Loading Conditions, JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2018, 第 2 作者  通讯作者
（64） Calibration of a new local approach to cleavage fracture of ferritic steels, MATERIALS SCIENCE & ENGINEERING A, 2017, 第 1 作者
（65） Calibration of a new local approach to cleavage fracture of ferritic steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 第 1 作者
（66） Integrity analysis of a reactor pressure vessel subjected to a realistic pressurized thermal shock considering the cooling plume and constraint effects, ENGINEERING FRACTURE MECHANICS, 2016, 
（67） Comparison of KI calculation methods, ENGINEERING FRACTURE MECHANICS, 2016, 第 1 作者  通讯作者
（68） Investigation of constraint and warm prestressing effects by means of a local approach to fracture, ENGINEERING FRACTURE MECHANICS, 2015, 第 1 作者  通讯作者
（69） Calibration of Beremin model with the Master Curve, ENGINEERING FRACTURE MECHANICS, 2015, 第 1 作者  通讯作者
（70） A model to predict S-N curves for surface and subsurface crack initiations in different environmental medias, International Journal of Fatigue, 2015, 第 1 作者
（71） A model to predict S���N curves for surface and subsurface crack initiations in different environmental media, INTERNATIONAL JOURNAL OF FATIGUE, 2015, 第 1 作者
（72） Crack propagation mechanism and life prediction for very-high-cycle fatigue of a structural steel in different environmental medias, FRATTURA ED INTEGRITA STRUTTURALE, 2013, 第 1 作者
（73） Fatigue strength and crack initiation mechanism of very-high-cycle fatigue for low alloy steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 第 3 作者
（74） Experimental and theoretical investigation of environmental media on very-high-cycle fatigue behavior for a structural steel, ACTA MATERIALIA, 2011, 第 1 作者
（75） Effect of Aqueous Environment on High Cycle and Very-High-Cycle Fatigue Behavior for a Structural Steel, FRACTURE AND STRENGTH OF SOLIDS VII, PTS 1 AND 2, 2011, 第 2 作者
（76） Investigation of high cycle and Very-High-Cycle Fatigue behaviors for a structural steel with smooth and notched specimens, ENGINEERING FAILURE ANALYSIS, 2010, 第 1 作者  通讯作者
（77） 合金材料超高周疲劳行为的基本特征和影响因素, ESSENTIAL CHARACTERISTICS AND INFLUENTIAL FACTORS FOR VERY-HIGH-CYCLE FATIGUE BEHAVIOR OF METALLIC MATERIALS, ACTA METALLURGICA SINICA, 2009, 第 3 作者
（78） 不同介质环境中低合金钢的高周和超高周疲劳实验研究, 博士论文.北京.中国科学院力学研究所,2009, 2009, 第 1 作者
（79） 环境介质对40Cr结构钢高周和超高周疲劳行为的影响, EFFECTS OF ENVIRONMENTAL MEDIA ON HIGH CYCLE AND VERY-HIGH-CYCLE FATIGUE BEHAVIORS OF STRUCTURAL STEEL 40Cr, ACTA METALLURGICA SINICA, 2009, 第 1 作者
（80） 合金材料超高周疲劳行为的基本特征和影响因素, ESSENTIAL CHARACTERISTICS AND INFLUENTIAL FACTORS FOR VERY--HIGH--CYCLE FATIGUE BEHAVIOR OF METALLIC MATERIALS, 金属学报, 2009, 第 3 作者
（81） 限定型高压扭转变形分析, Deformation analysis of copper samples subjected to destined high pressure torsion, 塑性工程学报, 2009, 第 2 作者
（82） 环境介质对40Cr结构钢高周和超高周疲劳行为的影响, EFFECTS OF ENVIRONMENTAL MEDIA ON HIGH CYCLE AND VERY-HIGH-CYCLE FATIGUE BEHAVIORS OF STRUCTURAL STEEL 40Cr, ACTA METALLURGICA SINICA, 2009, 第 1 作者
（83） 强度状态对合金材料超高周疲劳行为的影响, 2009年度海峡两岸工程力学研讨会论文集.中国力学学会,2009,P.152-156, 2009, 第 1 作者
（84） ESSENTIAL CHARACTERISTICS AND INFLUENTIAL FACTORS FOR VERY-HIGH-CYCLE FATIGUE BEHAVIOR OF METALLIC MATERIALS, ACTA METALLURGICA SINICA, 2009, 第 3 作者
（85） 环境介质对40Cr结构钢高周和超高周疲劳行为的影响, EFFECTS OF ENVIRONMENTAL MEDIA ON HIGH CYCLE AND VERY-HIGH-CYCLE FATIGUE BEHAVIORS OF STRUCTURAL STEEL 40Cr, 金属学报, 2009, 第 1 作者
（86） Degradation of Fatigue Resistance in Very-High-Cycle Fatigue Regime for a Structural Steel due to Aqueous and 3.5% NaCl Environment, The 1st Japan-China Joint Symposium on Fatigue of Engineering Materials and Structures, 2008, 第 2 作者
（87） 低合金钢超高周疲劳的基本特征与机理, 第十四届全国疲劳与断裂学术会议论文集.中国机械工程学会,2008,P.42-50, 2008, 第 1 作者
（88） Fractography and Crack Initiation of Very-High- Cycle Fatigue for a High Carbon Low Alloy Steel, KEY ENGINEERING MATERIALS, 2006, 第 2 作者
（89） Fractography and Crack Initiation of Very-High-Cycle Fatigue for a High Carbon Low Alloy Steel, KEY ENGINERING MATERIALS, 2006, 第 2 作者
（90） 流量计的流体力学, Fluid Mechanics of Flow Metering, 国外科技新书评介, 2006, 第 2 作者
（91） 螺旋压缩机：数学模型和性能计算, Screw Compressors:Mathematical Modelling and Performance Calculation, 国外科技新书评介, 2006, 第 2 作者

   

（ 1 ） 增材制造航空材料的疲劳可靠性, 负责人, 中国科学院计划, 2024-01--2026-12
（ 2 ） 增材制造GH4169合金组织-寿命一体化评价方法及机理研究, 负责人, 中国科学院计划, 2024-01--2026-12
（ 3 ） 增材制造高温合金短裂纹扩展机理及疲劳极限预测方法, 负责人, 国家任务, 2022-12--2024-11
（ 4 ） 3D打印GH4169材料微结构与缺陷交互作用下多轴超高周疲劳研究, 负责人, 国家任务, 2021-01--2024-12
（ 5 ） 固体火箭结构断裂失效分析, 负责人, 境内委托项目, 2021-01--2025-12
（ 6 ） 增材制造合金材料疲劳与断裂行为的宏、微观尺寸效应, 参与, 国家任务, 2020-01--2024-12
（ 7 ） 考虑热预应力效应的核反应堆结构钢双轴断裂跨尺度研究, 负责人, 国家任务, 2019-01--2022-12

（1）Fracture mechanics analysis of embedded cracks under PTS and effects of residual stresses   2017-07-17
（2）Constraint analysis with two-parameter fracture criterion under uniaxial and biaxial loading   2017-06-18
（3）Deterministic and Probabilistic PTS study for a reactor pressure vessel considering plume cooling effects   2016-07-18
（4）Review of Integrity analyses of the Reactor Pressure Vessels in Taiwan and Switzerland (PSI)   2016-04-11
（5）Methodology and warm prestressing effect for pressurized thermal shock analysis in nuclear power plant   2014-08-20