CUI Guanglei received a PhD from Institute of Chemistry,  Chinese Academy of Sciences (CAS) in 2005. He then did his postdoctoral research  at Max-Planck-Institute for Polymer Research and Max-Planck-Institute for Solid  State Research before joining Qingdao Institute of Bioenergy and Bioprocess  Technology (QIBEBT), CAS in 2009. He is currently a professor and the leader of  Biomimetics for Energy Storage Group, the director of Applied Energy Technology  Division, and the deputy director of Academic Committee of QIBEBT. He is a recipient of the Hundred Talents Program of CAS, the Distinguished Young  Scholars of Shandong Province in 2009, the Taishan Scholars of Shandong Province  in 2015, the Distinguished Professor of CAS in 2015, and the National Science Fund for Distinguished Young Scholars in 2016. Now he  leads a group including 18 faculties, 5 postdoctoral fellows and 9 PhD/master  students.


Research Areas

Electrochemical energy storage and conversion  material 


1. 2002/9–2005/7, Institute of Chemistry, Chemistry, PHD.

2. 1997/9–2000/7, Qingdao University of Science and Technology, Applied Chemistry,Master

3. 1993/9–1997/7, Shandong Nornal University, Chemistry, Bachelor


Work Experience

1.2009/2-, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Professor

2.2007/9-2009/2, Max Planck Institute for Solid State Research,Postdoctoral,Co-Advisor:Joachim Maier

3.2005/9-2007/9,Max-Planck Institute for polymer research,Postdoctoral,Co-Advisor:Klaus Müllen

Teaching Experience

​Frontiers of Energy and Chemical Materials



(1) Nickel Disulfide–Graphene Nanosheets Composites with Improved Electrochemical Performance for Sodium Ion Battery, ACS Applied Materials & Interfaces, 2016, Corresponding authors.
(2) A sustainable and rigid-flexible coupling cellulose-supported poly(propylene carbonate) polymer electrolyte towards 5V high voltage lithium batteries, Electrochimica Acta, 2016, Corresponding authors.
(3) The fabrication of formamidinium lead iodide perovskite thin films via organic cation exchange, Chemical Communications, 2016, Corresponding authors.
(4) High-voltage Zn/LiMn0.8Fe0.2PO4 aqueous rechargeable battery by virtue of “water-in-salt” electrolyte, Electrochemistry Communications, 2016, Corresponding authors.
(5) Transformative Evolution of Organolead Triiodide Perovskite Thin Films from Strong Room-Temperature Solid-Gas Interaction between HPbI3-CH3NH2 Precursor Pair, Journal of the American Chemical Society, 2016, Corresponding authors.
(6) High energy density hybrid Mg2+/Li+ battery with superior ultra-low temperature performance, Journal of Materials Chemistry A, 2016, Corresponding authors.
(7) Surface and Interface Issues in Spinel LiNi0.5Mn1.5O4: Insights into a Potential Cathode Material for High Energy Density Lithium Ion Batteries, Chemistry of Materials, 2016, Corresponding authors.
(8) NaV3(PO4)3/C nanocomposite as novel anode material for Na-ion batteries with high stability, Nano Energy, 2016, Corresponding authors.
(9) A high-voltage poly(methylethyl [small alpha]-cyanoacrylate) composite polymer electrolyte for 5 V lithium batteries, Journal of Materials Chemistry A, 2016, Corresponding authors.
(10) Methylamine-Gas-Induced Defect-Healing Behavior of CH3NH3PbI3 Thin Films for Perovskite Solar Cells, Angewandte Chemie, 2015, Corresponding authors.
(11) Interface engineering for high-performance perovskite hybrid solar cells, Journal of Materials Chemistry A, 2015, Corresponding authors.
(12) A composite gel polymer electrolyte with high voltage cyclability for Ni-rich cathode of lithium-ion battery, Electrochemistry Communications, 2015, Corresponding authors.
(13) Ultrafast Alkaline Ni/Zn Battery Based on Ni-Foam-Supported Ni3S2 Nanosheets, ACS applied materials & interfaces, 2015, Corresponding authors.
(14) NASICON-Structured NaSn2(PO4)3with Excellent High-Rate Properties as Anode Material for Lithium Ion Batteries, Chemistry of Materials, 2015, Corresponding authors.
(15) High energy density sodium-ion capacitors through co-intercalation mechanism in diglyme-based electrolyte system, Journal of Power Sources, 2015, Corresponding authors.
(16) Flexible graphite film with laser drilling pores as novel integrated anode free of metal current collector for sodium ion battery, Electrochemistry Communications, 2015, Corresponding authors.
(17) A Carbon- and Binder-Free Nanostructured Cathode for High-Performance Nonaqueous Li-O2Battery, Advanced Science, 2015, Corresponding authors.
(18) Bulk graphdiyne powder applied for highly efficient lithium storage,  Chem. Commun., 2015, Corresponding authors.
(19) Controllable Formation of Niobium Nitride/Nitrogen-Doped Graphene Nanocomposites as Anode Materials for Lithium-Ion Capacitors, Particle & Particle Systems Characterization, 2015, Corresponding authors.
(20) Conjugated microporous polymers with excellent electrochemical performance for lithium and sodium storage,  Journal of Materials Chemistry A, 2015, Corresponding authors.
(21) Direct Observation of Ordered Oxygen Defects on the Atomic Scale in Li2O2for Li-O2Batteries, Advanced Energy Materials, 2015, Corresponding authors.
(22) Biomass-derived materials for electrochemical energy storages, Progress in Polymer Science, 2015, Corresponding authors.
(23) Hierarchically Designed Germanium Microcubes with High Initial Coulombic Efficiency toward Highly Reversible Lithium Storage, Chemistry of Materials, 2015, Corresponding authors.
(24) Strategies for improving the cyclability and thermo-stability of LiMn2O4-based batteries at elevated temperatures, Journal of Materials Chemistry A, 2015, Corresponding authors.
(25) Heat-resistant and rigid-flexible coupling glass-fiber nonwoven supported polymer electrolyte for high-performance lithium ion batteries, Electrochimica Acta, 2015, Corresponding authors.
(26) A Ni3S2-PEDOT monolithic electrode for sodium batteries, Electrochemistry Communications , 2015, Corresponding authors.
(27) Functional lithium borate salts and their potential application in high performance lithium batteries,  Coordination Chemistry Reviews , 2015, Corresponding authors.
(28) Rigid–Flexible Coupling High Ionic Conductivity Polymer Electrolyte for an Enhanced Performance of LiMn2O4/Graphite Battery at Elevated Temperature, ACS Appl. Mater. Interfaces , 2015, Corresponding authors.
(29) A Polyborate Coated Cellulose Composite Separator for High Performance Lithium Ion Batteries,  Journal of the Electrochemical Society, 2015, Corresponding authors.
(30) Lithium storage in a highly conductive Cu3Ge boosted Ge/graphene aerogel, Journal of Materials Chemistry A, 2015, Corresponding authors.
(31) Additive-Modulated Evolution of HC(NH2)2PbI3Black Polymorph for Mesoscopic Perovskite Solar Cells, Chemistry of Materials, 2015, Corresponding authors.
(32) Compatible interface design of CoO-based Li-O2 battery cathodes with long-cycling stability, Scientific Reports, 2015, Corresponding authors.
(33) Single-ion dominantly conducting polyborates towards high performance electrolytes in lithium batteries, Journal of Materials Chemistry A, 2015, Corresponding authors.
(34) Cellulose/Polysulfonamide Composite Membrane as a High Performance Lithium-Ion Battery Separator, ACS Sustainable Chemistry Engineering, 2014, Corresponding authors.
(35) Insight into Enhanced Cycling Performance of Li–O2Batteries Based on Binary CoSe2/CoO Nanocomposite Electrodes, The Journal of Physical Chemistry Letters, 2014, Corresponding authors.
(36) NH2CH═NH2PbI3: An Alternative Organolead Iodide Perovskite Sensitizer for Mesoscopic Solar Cells, Chemistry of Materials, 2014, Corresponding authors.
(37) Nitrogen-doped carbon and iron carbide nanocomposites as cost-effective counter electrodes of dye-sensitized solar cells, Journal of Materials Chemistry A, 2014, Corresponding authors.
(38) Polydopamine-coated cellulose microfibrillated membrane as high performance lithium-ion battery separator, RSC Advances, 2014, Corresponding authors.
(39) Sustainable, heat-resistant and flame-retardant cellulose-based composite separator for high-performance lithium ion battery,  Scientific Reports , 2014, Corresponding authors.
(40) NiCo2S4 sub-micron spheres: an efficient non-precious metal bifunctional electrocatalyst, Nanoscale, 2014, Corresponding authors.
(41) Taichi-inspired rigid-flexible coupling cellulose-supported solid polymer electrolyte for high-performance lithium batteries, Sci. Rep., 2014, Corresponding authors.
(42) A superior thermostable and nonflammable composite membrane towards high power battery separator, Nano Energy, 2014, Corresponding authors.
(43) High-Performance Cobalt Selenide and Nickel Selenide Nanocomposite Counter Electrode for Both Iodide/Triiodide and Cobalt(II/III) Redox Couples in Dye-Sensitized Solar Cells, Chinese Journal of Chemistry , 2014, Corresponding authors.
(44)  A single-ion gel polymer electrolyte based on polymeric lithium tartaric acid borate and its superior battery performance, Solid State Ionics, 2014, Corresponding authors.
(45) Reproducible One-Step Fabrication of Compact MAPbI3–xClxThin Films Derived from Mixed-Lead-Halide Precursors, Chemistry of Materials, 2014, Corresponding authors.
(46) A single-ion gel polymer electrolyte system for improving cycle performance of LiMn2O4 battery at elevated temperatures, Electrochimica Acta, 2014, Corresponding authors.
(47) One-step, solution-processed formamidinium lead trihalide (FAPbI(3-x)Clx) for mesoscopic perovskite-polymer solar cells, Physical Chemistry Chemical Physics, 2014, Corresponding authors.
(48) Vapour-based processing of hole-conductor-free CH3NH3PbI3 perovskite/C60 fullerene planar solar cells, RSC Advances , 2014, Corresponding authors.
(49) Anticorrosive flexible pyrolytic polyimide graphite film as a cathode current collector in lithium bis(trifluoromethane sulfonyl) imide electrolyte, Electrochemistry Communications , 2014, Corresponding authors.
(50) RuSe/reduced graphene oxide: an efficient electrocatalyst for VO2+/VO2+ redox couples in vanadium redox flow batteries, RSC Advances, 2014, Corresponding authors.
(51) The morphology transformation from helical nanofiber to helical nanotube in a diarylethene self-assembly system, Chemical Communications, 2014, Corresponding authors.
(52) A Heat Resistant and Flame-Retardant Polysulfonamide/Polypropylene Composite Nonwoven for High Performance Lithium Ion Battery Separator, Journal of the Electrochemical Society, 2014, Corresponding authors.
(53) Direct Observation of Ordered Oxygen Defects on the Atomic Scale in Li2O2for Li-O2Batteries, Advanced Energy Materials , 2014,Corresponding authors.
(54) Electrodeposition of nanostructured cobalt selenide films towards high performance counter electrodes in dye-sensitized solar cells, RSC Adv, 2013, Corresponding authors.
(55) An insight into the effect of nitrogen doping on the performance of a reduced graphene oxide counter electrode for dye-sensitized solar cells, RSC Adv, 2013, Corresponding authors.
(56) A Heat-Resistant Silica Nanoparticle Enhanced Polysulfonamide Nonwoven Separator for High-Performance Lithium Ion Battery, J. Electrochem. Soc, 2013, Corresponding authors.
(57) A highly safe and inflame retarding aramid lithium ion battery separator by a papermaking process, Solid State Ionics, 2013, Corresponding authors.
(58) Preparation of Silicon@Silicon Oxide Core–Shell Nanowires from a Silica Precursor toward a High Energy Density Li-Ion Battery Anode, ACS Appl. Mater. Interfaces, 2013, Corresponding authors.
(59) A single-ion gel polymer electrolyte based on polymeric lithium tartaric acid borate and its superior battery performance, Solid State Ionics,, 2013, Corresponding authors.
(60) Electrostatic assembly of mesoporous Li4Ti5O12/graphene hybrid as high-rate anode materials, Scripta Mater.,, 2013, Corresponding authors.
(61) A Core@sheath Nanofibrous Separator for Lithium Ion Batteries Obtained by Coaxial Electrospinning, Macromol. Mater. Eng., 2013, Corresponding authors.
(62) A Core-Shell Structured Polysulfonamide-Based Composite Nonwoven Towards High Power Lithium Ion Battery Separator, J. Electrochem. Soc., 2013, Corresponding authors.
(63) Nitridated mesoporous Li4Ti5O12 spheres for high-rate lithium-ion batteries anode material, J. Solid State Electrochem., 2013, Corresponding authors.(64) An elastic germanium–carbon nanotubes–copper foam monolith as an anode for rechargeable lithium batteries, RSC Adv., 2013, Corresponding authors.
(65) A high temperature operating nanofibrous polyimide separator in Li-ion battery, Solid State Ionics, 2013, Corresponding authors.
(66) Nanostructured transition metal nitrides for energy storage and fuel cells, Coordination Chemistry Reviews, 2013, Corresponding authors.
(67) Renewable and Superior Thermal-Resistant Cellulose-Based Composite Nonwoven as Lithium-Ion Battery Separator, ACS Appl. Mater. Interfaces, 2013, Corresponding authors.
(68) Exploring polymeric lithium tartaric acid borate for thermally resistant polymer electrolyte of lithium batteries, Electrochimica Acta, 2013, Corresponding authors.
(69) Mesoporous Cobalt Molybdenum Nitride: A Highly Active Bifunctional Electrocatalyst and Its Application in Lithium-O2 Batteries, J. Phys. Chem. C, 2013,Corresponding authors.
(70) Transition-metal nitride nanoparticles embedded in N-doped reduced graphene oxide: superior synergistic electrocatalytic materials for the counter electrodes of dye-sensitized solar cells, J. Mater. Chem. A, 2013, Corresponding authors.
(71) Mesoporous NiCo2O4 nanoflakes as electrocatalysts for rechargeable Li–O2 batteries, Chem. Commun., 2013, Corresponding authors.
(72)  Graphene decorated with molybdenum dioxide nanoparticles for use in high energy lithium ion capacitors with an organic electrolyte,  J. Mater. Chem. A, 2013, Corresponding authors.
(73) Coaxial NixCo2x(OH)6x/TiN Nanotube Arrays as Supercapacitor Electrodes, ACS Nano, 2013, Corresponding authors.
(74) An insight into the effect of nitrogen doping on the performance of a reduced graphene oxide counter electrode for dye-sensitized solar cells, RSC Adv., 2013, Corresponding authors.
(75) Molybdenum Nitride/N-Doped Carbon Nanospheres for Lithium-O2 Battery Cathode Electrocatalyst, ACS Appl. Mater. Interfaces, 2013, Corresponding authors.
(76)  In situ synthesis of a graphene/titanium nitride hybrid material with highly improved performance for lithium storage, Journal of Materials Chemistry , 2012, Corresponding authors.
(77) Hierarchical micro/nano-structured titanium nitride spheres as a high performance counter electrode for a dye-sensitized solar cell, Journal of Materials Chemistry , 2012, Corresponding authors.
(78) Synthesis of Nitrogen-Doped MnO/Graphene Nanosheets Hybrid Material for Lithium Ion Batteries, ACS Applied Materials Interfaces , 2012, Corresponding authors.
(79)Nanostructured Titanium Nitride/PEDOT:PSS Composite Films As Counter Electrodes of Dye-Sensitized Solar Cells, ACS Applied Materials Interfaces , 2012, Corresponding authors.
(80)A novel assembly of LiFePO4 microspheres from nanoplates, CrystEngComm, 2012, Corresponding authors.
(81) Nitrogen-doping of chemically reduced mesocarbon microbead oxide for the improved performance of lithium ion batteries, carbon, 2012, Corresponding authors.
(82) 1D Coaxial Platinum/Titanium Nitride Nanotube Arrays with Enhanced Electrocatalytic Activity for the Oxygen Reduction Reaction: Towards Li Air Batteries, ChemSusChem, 2012, Corresponding authors.
(83) Oxygen-enriched carbon material for catalyzing oxygen reduction towards hybrid electrolyte Li-air battery, J. Mater. Chem., 2012, Corresponding authors.
(84) Manganese monoxide/titanium nitride composite as high performance anode material for rechargeable Li-ion batteries , Electrochimica Acta, 2012, Corresponding authors.(87) Graphene nanosheet–titanium nitride nanocomposite for high performance electrochemical capacitors without extra conductive agent addition, J. Mater. Chem., 2012, Corresponding authors.
(85) Nanostructured transition metal nitride composites as energy storage material, Chin. Sci. Bull., 2012, Corresponding authors.
(86) CuInS2 Nanocrystals/PEDOT:PSS Composite Counter Electrode for Dye-Sensitized Solar Cells, ACS Appl. Mater. Interfaces, 2012, Corresponding authors.
(87) Exfoliated graphite nanosheets/carbon nanotubes hybrid materials for superior performance supercapacitors, Journal of Solid State Electrochemistry , 2011, Corresponding authors.
(88), Graphene oxide nanosheets/multi-walled carbon nanotubes hybrid as an excellent electrocatalytic material towards VO2+/VO2+ redox couples for vanadium redox flow batteries, Energy Environmental Science , 2011, Corresponding authors.
(89)Molybdenum nitride based hybrid cathode for rechargeable lithium–O2 batteries, Chemical Communications , 2011, Corresponding authors.
(90)  A hybrid material of vanadium nitride and nitrogen-doped graphene for lithium storage, Journal of Materials Chemistry , 2011, Corresponding authors.
(94)  A renewable bamboo carbon/polyaniline composite for a high-performance supercapacitor electrode material, Journal of Solid State Electrochemistry , 2011, Corresponding authors.
(91) Mesoporous Coaxial Titanium Nitride-Vanadium Nitride Fibers of Core-shell Structures for High-Performance Supercapacitors, ACS Applied Materials Interfaces , 2011, Corresponding authors.
(92) A biocompatible titanium nitride nanorods derived nanostructured electrode for biosensing and bioelectrochemical energy conversion, Biosensors and Bioelectronics, 2011, Corresponding authors.
(93)TiN/VN composites with core/shell structure for supercapacitors, Materials Research Bulletin, 2011, Corresponding authors.
(94)Rutile TiO2 nanorod arrays directly grown on Ti foil substrates towards lithium-ion micro-batteries, Thin Solid Films, 2011, Corresponding authors.
(94) Optical modulation of supramolecular assembly of amphiphilic photochromic diarylethene: from nanofiber to nanosphere, Chem. Commun, 2011, Corresponding authors.
(96) Nitrogen-doped graphene nanosheets with excellent lithium storage properties, Journal of Materials Chemistry, 2011, Corresponding authors.
(97)Graphene oxide nanoplatelets as excellent electrochemical active materials for VO2+/VO2 + and V2+/V3+ redox couples for a vanadium redox flow battery, Carbon, 2011, Corresponding authors.
(98)One dimensional MnO2/titanium nitride nanotube coaxial arrays for high performance electrochemical capacitive energy storage, Energy Environmental Science, 2011, Corresponding authors.
(99)  A novel germanium/carbon nanotubes nanocomposite for lithium storage materia, Electrochimica Acta, 2010, Corresponding authors.
(100) A Carbon/Titanium Vanadium Nitride Composite for Lithium Storage , ChemPhysChem, 2010, Corresponding authors.
(101) A facile method of preparing mixed conducting LiFePO4/graphene composites for lithium-ion batteries, Solid State Ionics, 2010, Corresponding authors.


1. Method for preparing non-symmetrical electrochemical supercapacitor and electrode materials, Invention, 2012, Patent No.: ZL200910226430.4.

2. Diaphragm for lithium-air battery and preparation method thereof, Invention, 2011, Patent No.:  ZL200910249811.4.

3. Carbon composite metal nitride electrode material and asymmetric electrochemical super capacitor, Invention, 2011, Patent No.: ZL201010104003.1.

4. Method for preparing carbon/metal nitride composite negative electrode material of lithium-ion secondary battery, Invention, 2013, Patent No.: ZL201010104001.2.

5. Preparation method for nanoscale transition metal nitride/carbon composite material, Invention, 2012, Patent No.: ZL201010108048.6.

6. Electrode used for vanadium redox flow battery and preparation method for electrode, Invention, 2014, Patent No.: ZL201010219681.2.

7. Spherical phosphate compound, Invention, 2012, Patent No.: ZL201010266316.7.

8. Electrode material of supercapacitor, and manufacturing method and application of electrode material, Invention, 2014, Patent No.: ZL201010544637.9.

9. Oxygen electrode of lithium air battery as well as preparation method and application thereof , Invention, 2013, Patent No.: ZL201010548567.4.

10. Iodine-doped carbon material serving as cathode of dye-sensitized solar cell, Invention, 2013, Patent No.: ZL201110083182.X.

11. Coaxial compound nanometre fibre film as well as preparation method and application thereof, Invention, 2013, Patent No.: ZL201110147715.6.

12. Polyimide-base nano fibrous membrane, and preparation method and application thereof, Invention, 2013, Patent No.: ZL201110147725.X.

13. Inorganic/organic composite polyimide nanometer fibrous film, preparation method thereof and application thereof, Invention, 2013, Patent No.: ZL201110147732.X.

14. Method for preparing metal sodium through electrolysis, Invention, 2016, Patent No.: ZL201110306653.9.

15. Method for preparing metal lithium through electrolysis, Invention, 2016, Patent No.: ZL201110306668.5.

16. Biomass cellulose porous composite diaphragm used for lithium ion secondary cell, Invention, 2014, Patent No.:ZL201110434221.6.

17. High-temperature resistant aromatic polysulfonamide base lithium ion battery diaphragm, Invention, 2016, Patent No.:ZL201210425855.X.

18. Polymer electrolyte based on polymeric borate lithium salt, and preparation and application thereof, Invention, 2016, Patent No.: ZL201210425872.3.

19. Polymeric borate salt, and preparation method and application thereof, Invention, 2016, Patent No.: ZL201210425838.6.

20. Dye-sensitized solar cell counter electrode based on selenide, Invention, 2016, Patent No.: ZL201210456140.0.

21. Polyarylsulfone amido porous membrane, and preparation method and application thereof, Invention, 2015, Patent No.: ZL201310004633.5.

22. Method for solving flatulence of lithium titanate cathode of lithium battery by using double-boundary wrapping, Invention, 2016, Patent No.: ZL201310040563.9.

23. Polysulfonamide base lithium ion battery separator prepared through wet papermaking process, Invention, 2016, Patent No.: ZL201310246401.0.

24. Iodide solar cell prepared through solid-liquid reactions and provided with perovskite structures, Invention, 2016, Patent No.: ZL201310257024.0.

25. Simulated mussel protein environment-friendly lithium ion battery adhesive, Invention, 2016, Patent No.: ZL201310280022.3.

26. Sodium alginate-based lithium battery diaphragm and preparation method thereof, Invention, 2016, Patent No.:201310299965.0.

27. Cellulose nanofibers and silver nanowires composite conductive film and preparation method of composite conductive film, Invention, 2016, Patent No.:ZL201310399562.3.

28.  Transparent conducting thin film based on sodium alga acid and preparation method of transparent conducting thin film, Invention, 2016, Patent No.:201410019636.0.

29. Inflatable graphite/melamine salt synergic intumescent flame retardant and preparation method thereof, Invention, 2016, Patent No.: ZL201410073666.X.

30. Method for large-area transfer of CVD graphene film, Invention, 2015, Patent No.: ZL201410018825.6.

31. High-temperature resistance lithium ion secondary battery adhesive and preparation method thereof, Invention, 2015, Patent No.: 201310268867.0.

32. Ultrasonic-assisted electrostatic spinning nano-fiber preparation device, Utility Model, 2013, Patent No.: ZL201220603914.3.

33. Combined papermaking machine for preparing composite membranes, Utility Model, 2013, Patent No.: ZL201220604292.6.

34. Preparation device for melt-blown-high-flux electrospun composite non-woven fabric, Utility Model, 2013, Patent No.: ZL201220602823.8.

35. Soaking plate based on artificial graphite film, Utility Model, 2014, Patent No.: ZL201320553495.1.

36. Wave absorption cooling fin based on carbon material, Utility Model, 2014, Patent No.: ZL201320553805.X.

37. Graphite film heat conduction radiating fin with wrinkle structure, Utility Model, 2014, Patent No.: ZL201420026193.3.

38. Long-life compensation lithium ion capacitor, Utility Model, 2014, Patent No.: ZL201320519098.2.

Research Interests

1) polymer electrolyte 

2) all-solid-state lithium ion battery 

3) Lithium ion capacitor 

4) next generation high energy density battery

5) Perovskite solar cell 


1. Energy Storage Devices with Both “Power” and “Energy”, 2016 (11th) Inernational Forum on Li Battery Technology & Industrial Development, Oct. 22-24, 2016. 

2. Rigid-Flexible Coupling Polymer Electrolyte Towards All-Solid-State Lithium Battery, CIBF2016 12th China International Battery Fair, May 24-26, 2016.

3. Rigid-Flexible Coupling Polymer Electrolyte Towards All-Solid-State Lithium Battery, 15th International Symposium on Polymer Electrolytes taking place, Aug. 15-19, 2016.

4. An (cathode/anode) interface study of lithium-oxygen battery, The 29th Chinese Chemical Society congress, Aug. 4-7, 2014.


1) Institute of Chemistry, CAS

2) Institute of Physics, CAS

3) Brown University



董杉木  博士研究生  081701-化学工程  

张中一  博士研究生  081701-化学工程  

王珊  硕士研究生  081701-化学工程  

张传健  博士研究生  081701-化学工程  

岳艳花  硕士研究生  080502-材料学  

张小影  博士研究生  081701-化学工程  

张圣亮  硕士研究生  080502-材料学  

商超群  博士研究生  081701-化学工程  

张克军  博士研究生  081701-化学工程  

胡朴  博士研究生  081701-化学工程  

付林  硕士研究生  081701-化学工程  

杜惠平  博士研究生  081701-化学工程  

张忠华  博士研究生  081701-化学工程  

王龙龙  博士研究生  080502-材料学  

杜奥冰  博士研究生  080502-材料学  

王青磊  博士研究生  080502-材料学  

马月  博士研究生  080501-材料物理与化学  

胡正林  博士研究生  080502-材料学  

唐犇  硕士研究生  080502-材料学  

韩晓琪  博士研究生  080502-材料学  

王琛  博士研究生  080502-材料学  

孟红光  硕士研究生  085204-材料工程  

张建军  博士研究生  080501-材料物理与化学  

柴敬超  博士研究生  080501-材料物理与化学  


王延涛  博士研究生  080502-材料学  

卢国立  博士研究生  080502-材料学  

赵志明  博士研究生  080502-材料学  

崔龙飞  博士研究生  080502-材料学  

周丽雪  硕士研究生  085204-材料工程  

刘鑫  博士研究生  080502-材料学  

张圣行  博士研究生  080502-材料学  

张霄虎  硕士研究生  085600-材料与化工  

祝国玺  硕士研究生  085600-材料与化工  

阳源源  硕士研究生  080501-材料物理与化学  

许高洁  博士研究生  080502-材料学  

刘亭亭  博士研究生  080502-材料学  

Honors & Distinctions

1. The “100 talents” program of Chinese Academy of Sciences

2. Shangdong Province Fund for Distinguished Young Scientist

3. The National Science Foundation for Distinguished Young Scholars of China