发表论文
(1) Effect of process parameters on defects, melt pool shape, microstructure, and tensile behavior of 316L stainless steel produced by selective laser melting, Acta Metallurgica Sinica (English Letters), 2020, 通讯作者(2) Factor analysis of selective laser melting process parameters with normalised quantities and Taguchi method, Optics and Laser Technology, 2019, 通讯作者(3) 炮钢表面激光熔覆Hastelloy C-276涂层的组织及性能, 应用激光, 2018, 通讯作者(4) 车轮表面宏观形貌取向对高速轮轨水润滑 黏着系数的影响, 力学学报, 2018, 通讯作者(5) 轮轨试样表面粗糙度取向对油润滑下摩擦系数的影响, 力学学报, 2016, 通讯作者(6) Synergy to discovery and innovation — Growth of nanorods, Theoretical & Applied Mechanics Letters, 2016, 第 1 作者(7) 激光毛化形貌对轮轨材料混合润滑摩擦系数的影响, 中国激光, 2015, 通讯作者(8) A nanocrystalline zirconium carbide coating as a functional corrosion-resistant barrier for polymer electrolyte membrane fuel cell application, Journal of Power Sources, 2015, 第 2 作者(9) Effect of substrate movement speed by synchronous rolling-casting freeform manufacturing for metal on microstructure and mechanical property of zll04 aluminum alloy slurry, Journal of Wuhan University of Technology-Materials Science Edition, 2015, 通讯作者(10) Corrosion behavior of a ZrCN coated Ti alloy with potential application as a bipolar plate for proton exchange membrane fuel cell, Journal of Alloys and Compounds, 2015, 第 3 作者(11) Oxidation resistance of Mo(Si1-xAlx)(2) nanocrystalline films and characterization of their oxide scales by electrochemical impedance spectroscopy, RSC ADVANCES, 2014, 第 2 作者(12) Investigation on rolling sliding wear behavior of wheel steel by laser dispersed treatment, Wear, 2014, 第 1 作者(13) Influence of laser dispersed treatment on rolling contact wear and fatigue behavior of railway wheel steel, Materials and Design, 2014, 第 3 作者(14) Uniting superhardness and damage-tolerance in a nanosandwich-structured Ti–B–N coating, Scripta Materialia, 2014, 第 2 作者(15) Niobium addition enhancing the corrosion resistance of nanocrystalline Ti5Si3 coating in H2SO4 solution, Acta Materialia, 2014, 第 3 作者(16) 激光离散熔凝对小滑差率接触疲劳性能的影响, 应用激光, 2014, 通讯作者(17) 激光离散处理车轮钢-钢轨钢摩擦副的摩擦学性能研究, 摩擦学报, 2014, 第 3 作者(18) Role of Cr additions in enhancing wear and oxidation resistance of (Mo1-xCrx)Si2 nanocrystalline films, Ceramics International, 2014, 第 2 作者(19) Mechanical and electrochemical properties of nanocrystalline (Mo1-xCrx)3Si coatings: Experimental and modeling studies, Journal of Alloys and Compounds, 2014, 第 2 作者(20) Fatigue crack propagation in laser alloyed ductile cast iron surface, Journal of Laser Applications, 2013, 第 1 作者(21) Mechanical properties of Cr-alloyed MoSi2-based nanocomposite coatings with a hierarchical structure, Journal of Alloys and Compounds, 2013, 第 3 作者(22) Role of Al additions in wear control of nanocrystalline Mo(Si1-xAlx)2 coatings prepared by double cathode glow discharge technique, Materials Science and Technology, 2013, 第 3 作者(23) CL60车轮车轮表面激光离散熔凝的滚动摩擦形貌, 中国激光, 2013, 第 2 作者(24) Electrochemical Characterization of Ti5Si3/TiC Nanocomposite Coating in HCl Solution, International Journal of Electrochemical Science, 2013, 第 3 作者(25) Effect of Al addition upon mechanical robustness and corrosion resistance of Mo5Si3/MoSi2 gradient nanocomposite coatings, Surface and Coatings Technology, 2013, 第 3 作者(26) Novel high damage-tolerant, wear resistant MoSi2-based nanocomposite coatings, Applied Surface Science, 2013, 第 2 作者(27) Investigation on Microstructural characterization of in situ TiB /Al metal matrix composite by laser cladding, Materials Science and Engineering A, 2007, 第 2 作者(28) 激光合金化对疲劳裂纹扩展速率的影响, 中国激光, 2007, 第 1 作者(29) 激光点状合金化对42CrMo钢疲劳裂纹扩展速率的影响, 应用激光, 2007, 第 1 作者(30) Investigation on crater morphology by high repetitive rate YAG laser-induced discharge texturing, Surf. Coat. Tech., 2006, 第 1 作者(31) Investigation on depth of heat affected zone of discharge spot by high repetitive rate YAG laser-induced discharge texturing, Surf. Rev. Lett. , 2006, 第 1 作者(32) The comparative study of thermal fatigue behavior of laser deep penetration spot cladding coating and brush plating Ni-W-Co coating, Applied Surface Science, 2006, 第 2 作者